New Member

[whb100 6]

I'm having fun with my new to me 1977 B-100 with a 42" mowing deck. Really looking forward to learning more her.

I've been mowing with it for about 3 months now. Runs better after changing the old rotten gas lines.

She mows well enough but would benefit form a set of new blades. Any recommendations on where to get a set of 3 and possible part number?

Thanks for any tips and information.

[parsonsponyz 190]

  Glad to have another new member to keep the interest alive.  It would help to have a model number/deck size/discharge to get the correct blades.

[gwest_ca-(File Mod) 11,409]

Welcome to Red Square.

Does the center holes of the blades have a 5/8" x 3/4" double-D center hole? The 1977 deck was the last year to use these unless the spindle assemblies were updated.

The next deck has 3/4" center holes in the blades.

You could have an older or newer deck than 1977. They all fit.

Click on the fuzzy pictures in the links for more info. The first is rear discharge and the second side discharge.

 

[whb100 6]

Thanks for the welcome. I'm not sure if it's an old style spindle hole or not. Haven't pulled them off yet.

 

Numbers on the frame 10K801-15028.

                                           7098

 

Deck is side discharge and numbers as best as I can make out are 5-42MS02-18133

                                                                                                                   7103

 

[Ed Kennell 41,566]

to the 

[whb100 6]

gwest_ca, are you saying that the blades with the round spindle hole will work on both early and lat model decks?

[953 nut 59,462]

Your deck takes the later model #106077 blade which is readily available. The manual below is for your mower deck.

 

[WHX?? 51,555]

Check with KB Horse parts on the blades.

https://www.wheelhorseforum.com/forum/177-kb-horse-parts/

[gwest_ca-(File Mod) 11,409]

2 hours ago, whb100 said:

gwest_ca, are you saying that the blades with the round spindle hole will work on both early and lat model decks?

No they will not work. Was just a way to help you identify the deck but you have the model number so not needed.

[whb100 6]

Thanks for all the info guys. I'll do some ordering tomorrow.

[Achto 29,329]

 

Looks like the gang has you covered. 

[whb100 6]

Sure do, thanks.

[oliver2-44 10,623]

[whb100 6]

Thanks olivar.

[Pullstart 66,280]

 

Got any cool 

[whb100 6]

Never posted a picture. I'll see if I can figure it out.

[rjg854 12,084]

2 hours ago, whb100 said:

Never posted a picture. I'll see if I can figure it out.

  In the reply box, click on the choose files in red, below.  Then go to your pictures and choose which ones you want to post.  Once they load, click on the plus sign on the picture and you're all set.