Kim15 1 #1 Posted June 20 My C-175 needs some valve work so I bought this 520 H figuring I could do the valve job later. It only has 1300 hours on it and was always kept inside. It's still shiny and all engine specs are fine but the wiring diagram I have doesn't have the colors that are on the tractor. Does anyone have the right one for mine? I installed a new starter but someone has worked on this machine and I bought it as non running. I can read a diagram just fine but when the colors are wrong and there are wires dangling with no ends on them, it gets difficult. Thanks for any and all assistance! Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,402 #2 Posted June 20 I take it you are looking as this file. I am the one that added the color using what was printed on the diagrams. One area that may be incorrect are the wires from the 9-pin connector to the engine. That harness was supplied by Onan so continued the Wheel Horse colors to the engine because I don't know what Onan used. At one time they used all black wires with a color stripe that by now the stripe has all but disappeared. UV light has also changed many colors. Share this post Link to post Share on other sites
Kim15 1 #3 Posted June 22 Thank you, thank you thank you!!! It's EXACTLY what I needed! Live long and prosper Sir! 1 Share this post Link to post Share on other sites
