S416-8 387 #1 Posted June 9 GM and from what I am finding the part number for the wiring harnesw for my D160 is112897. Does anyone know if this is correct ? Thanks Share this post Link to post Share on other sites
953 nut 59,168 #2 Posted June 9 The likelihood of finding a NOS 48 year old wiring harness is slim to none. The main wiring harness for a 1978 D is shown as 105026 but it also has other sub-harnesses that go with it. Happy Hunting and if you decide to make your own harness we can answer any questions you may have. Share this post Link to post Share on other sites
lynnmor 7,703 #3 Posted June 9 Right church, wrong pew. You should have posted in the Wheel Horse Electrical forum. **moved - nylyon** Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,386 #4 Posted June 9 Just in case 1977 and 1978 are different Share this post Link to post Share on other sites
S416-8 387 #5 Posted June 9 Thanks I may have found on on eBay and if not will be making my own.. Share this post Link to post Share on other sites
953 nut 59,168 #6 Posted June 9 9 hours ago, gwest_ca said: in case 1977 and 1978 are different Both have the same part number. 6 hours ago, S416-8 said: Thanks I may have found on on eBay and if not will be making my own.. TORO didn't buy Wheel Horse until 1986 and the bags have TORO imprinted on them so I doubt that they would be a "D" harness. For $ 25.00 plus shipping you MIGHT get enough wire and connectors to be worth it. Share this post Link to post Share on other sites
MainelyWheelhorse 1,339 #7 Posted Tuesday at 03:03 PM As someone who essentially is making their own harness for my 78 C141 Auto out of a 95 312 -8’s harness it isn’t crazy difficult especially if you ask for guidance here. It was a lot easier than I expected. Below is my thread. https://www.wheelhorseforum.com/topic/111966-9495-312-wiring-to-k321-what-am-i-missing/ Share this post Link to post Share on other sites
