Piet 2 #1 Posted April 21 Hi all, I recently bought a "revised" 110-4 (ID NUMBER E310B401 40359) but had to tinker a lot to make it a trustworthy companion. Now the PTO Drive belt has broken (part 114231) but I cannot find any size for it? The broken belt outside length is about 104cm/about 41 inch but I don't know if I recuperated all of the broken belt. Also is there an easy way to take of the mower deck to make access easier? Thanks in advance, Piet (Belgium, Europe) Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,256 #2 Posted April 21 Transmission drive belt 112147 (1/2" x 33.1") Pto drive belt 114231 - (Gates replacement 6841 - 1/2" x 41") Mower spindle belt 110420 replaced by 114567 (1/2" x 47.91") 1 1 Share this post Link to post Share on other sites
953 nut 58,031 #3 Posted April 21 Click on this link and it will show you all of the manuals we have related to your Wheel Horse. https://www.wheelhorseforum.com/search/?&q=110-4&type=downloads_file&search_and_or=or&sortby=relevancy 1 Share this post Link to post Share on other sites
Piet 2 #4 Posted April 23 (edited) Thanks for the very swift help, belts are ordered. Is there any manual describing the procedure to remove the mower deck? It's not in the manual and that would make replacing the belt so much easier. Piet Edited April 23 by Piet Share this post Link to post Share on other sites
stvski80085 161 #5 Posted April 24 You should be able to look on YouTube. If it has the attachomatic it’s real easy Share this post Link to post Share on other sites
Piet 2 #6 Posted April 24 1 hour ago, stvski80085 said: You should be able to look on YouTube. If it has the attachomatic it’s real easy I appreciate the response but I have a very hard time finding clips about my model 110-4 ... Piet Share this post Link to post Share on other sites
stvski80085 161 #7 Posted April 24 7 hours ago, Piet said: I appreciate the response but I have a very hard time finding clips about my model 110-4 ... Piet Yes, I realized after I posted you had a model I was not familiar with. Sorry about that. 1 Share this post Link to post Share on other sites
