2025 Big Show Buy/Trade/Sell Thread

[nylyon-(Admin) 7,836]

15 minutes ago, davem1111 said:

 

Those 3 things all go together for the complete seat bracket, right?  The 2 large "brackets" and the sliding adjusters just behind them?

 

Yes, the large plate (you show 2 of them, one of them has the seat springs but no front mounting brackets and the other the front mounting brackets but no springs. I would only need one, but with the seat springs and the mounting brackets) and the sliders

 

[sqrlgtr 618]

1 hour ago, rjg854 said:

One left just for you.

I'll take one if any are left or if someone backs out...

[rjg854 12,012]

1 minute ago, sqrlgtr said:

I'll take one if any are left or if someone backs out...

They are all spoken for 

[sqrlgtr 618]

10-4 afraid of that lol...

[davem1111 2,104]

Somebody has to want this lovely collection of Kohler pistons, valves, and gaskets!  I want to sell this whole batch together.  Not sure but I think most if not all of this is for a KT-17 Series II.  I don't remember if I already catalogued all this but don't have time to now.  If you want to make sure there's something specific in here, I can probably check later or tomorrow:

 

 

SERVING SUGGESTION:   There's time for someone who's going to the show to buy this, have me ship it to you, and you can sell whatever pieces you don't want at the show.  Think about it 

Edited Monday at 09:05 PM by davem1111

[953 nut 59,138]

4 hours ago, JPWH said:

I'll take 2 stacks and the lamps Randy if they are not spoken for.

Jay, do these need need a ride South? I have plenty of room.

[rjg854 12,012]

16 minutes ago, 953 nut said:

Jay, do these need need a ride South? I have plenty of room.

Thanks Richard that would save him the shipping. 

[JPWH 6,318]

18 minutes ago, 953 nut said:

Jay, do these need need a ride South? I have plenty of room.

Sure if you don't mind. Randy was checking on shipping for me but they would be In better hands with you than USPS.

 

[evanloock 230]

6 hours ago, WHX?? said:

Those decks are spoken for unless you want to sell yours?

I have no idea what you are talking about.  I posted a wanted post for parts in case anyone has some they are bringing to the show.

[WHX?? 51,330]

51 minutes ago, evanloock said:

I have no idea what you are talking about.  I posted a wanted post for parts in case anyone has some they are bringing to the show.

My bad I meant Pullstart might have one to sell. 

[ljsdad414 121]

C160 

P/O converted it from a hydro to manual transmission.  I never had it running but 16hp Kohler spins free, comes with plastic wheel weights and chains.  $200

SOLD

 

 

Plastic wheel weights $50

 

26x12-12 tires and wheels with tubes. Some cracking bit great tread - $100

 

42” RD Deck I have the two other blades and cover to go with it.  No rot I can clean it up better this weekend - $150

I will be at the show on Friday

 

 

 

 

Edited Thursday at 03:06 PM by ljsdad414
SOLD

[evanloock 230]

Just now, WHX?? said:

My bad I meant Pullstart might have one to sell. 

No worries.  Didn't want anyone to think I was encroaching on anyone's deal.

[ljsdad414 121]

Wheel Horse front mower carrier. I currently have it hooked up to a 42” RD deck. Works great, it doesn’t have the original rear brackets for the wheels, but the eye bolts work great.  Comes with belt and bracket for tractor.  
 

$250/BO for the carrier or

$325 for both

SOLD

 

 

 

 

Edited Wednesday at 08:00 PM by ljsdad414
SOLD

[ljsdad414 121]

C165 Auto with 48”deck, also comes with 520 forward swept axle, with 520 front wheels and tires, (not the tires shown). 
Runs great, new coil, points, condenser and plug last fall. Newer seat.  Will need a new choke cable.   Will come with turf tires on rear.  
$600.

I will be at the show Friday. If you need more pics, let me know.  

[Pullstart 65,659]

1 hour ago, ljsdad414 said:

with 520 front wheels and tires, (not the tires shown). 

what’s the deal with the tires that are shown?

[ljsdad414 121]

I am keeping them for a 520 I have

Edited Tuesday at 02:33 AM by ljsdad414

[clueless 3,179]

19 hours ago, rjg854 said:

Things I have that have been sitting on the shelves and should find a new home.

WH steering wheel 25

Other steering wheel 5

4 1/2" lights 10

Shifter 10

Kemp stacks 20 ea.

16 HP parts 

Bearing plate 5

Cam 5

Stator 25

Oil pan 5

Flywheel 10

 

WH can muffler 25

Other stacks 10

What does the WH can muffler fit?

[rjg854 12,012]

2 minutes ago, clueless said:

What does the WH can muffler fit?

It came off a 12hp Kohler engine I got to replace the one on my Raider

[clueless 3,179]

Just now, rjg854 said:

It came off a 12hp Kohler engine I got to replace the one on my Raider

I'll take it.

[rjg854 12,012]

 

2 minutes ago, clueless said:

I'll take it.

You got it, are you coming to the Show?

[S416-8 387]

D200 project and a nice mower deck off my D180. Open to offers,  would like to get 400

 

 

Edited Wednesday at 03:18 PM by S416-8

[S416-8 387]

Deck from my d180  $275

Edited Wednesday at 12:44 AM by S416-8

[hcminis 1,656]

On 6/4/2025 at 11:56 AM, davem1111 said:

 

I'll mention it here even though I'm not going to the show and we're pretty far apart.  I have a 60" deck and mule that I want to dispense with (among many other things - need to seriously downsize).

Maybe we could arrange for a ride for it to the show with someone near me or to the west of me?  The deck is not beautiful but everything seems to be present and spindles seem good. I haven't been able to test it yet because the only tractor I have with a swept front axle is non-operational at present and my spare time is as close to zero as it can get, if not into negative numbers. I'd be happy to get $50 for it. 

 

Seriously, I have a lot of small parts - hitches, pto bells, mules, tins, deck parts etc. (even a few whole tractors) that I need to either get to a good home or they'll end up being scrapped. Let me know if anyone is interested. I'll try to get a list put together and take some pictures.  Most of this I'm past the point of expecting to get any money out of.  Well, I do have a set of 4 new tires (520 size) and a few other things I'd like to get a few bucks for. I am not in a position to haul anything very far but could meet up somewhere 1-2 hours from home.

 

I'm in Indianapolis, IN.....send me a pm 

Edited Tuesday at 04:29 PM by hcminis

[Lane Ranger 11,213]

Bringing a Wheel Horse dump cart to sell.  $175 at the big show!

 

Also bringing a 702 Wheel Horse.   Will have a double hitch set up on rear and a set of red head caps on tractor.  Rear caps not as nice as front . Nice set of rear General tires that could use a good cleaning (mud and dirt) ! 

 

Has a neat old Nelson muffler too! 

Newer carb, new seat cushion on good square pan seat.  
 

 

$625 at the show. 

Edited Tuesday at 09:53 PM by Lane Ranger

[nylyon-(Admin) 7,836]

One of these days a dump cart will happen.