K341 16 hp

[John2189 536]

I need a head, the spark plug hole is stripped, installed helicoil, but it didn’t hold 

tried to post in wanted section, but nowhere to start new post 

[ebinmaine 72,391]

When you go to the wanted section scroll down to the bottom and you should see where to add a new post

[Ed Kennell 41,776]

John, you can actually click on CREATE  at the upper right of the home page.

Then scroll down and click on CLASSIFIEDS IN CLASSIFIED 

Click on WANTED

then CONTINUE

 

[John2189 536]

Thanks Ed and Eric. Id have never thought to go to the bottom of the page 

[Wild Bill 633 877]

@John2189, You may want to consider using an E-Z Lok threaded insert. The M14-1.25 threaded insert has a 3/4-16 external thread. P/Ns are 3209-1406, (0.328" Lg), 3209-1408 (0.453" Lg) and 3209-1412 (0.703" Lg). 

[John2189 536]

8 minutes ago, Wild Bill 633 said:

@John2189, You may want to consider using an E-Z Lok threaded insert. The M14-1.25 threaded insert has a 3/4-16 external thread. P/Ns are 3209-1406, (0.328" Lg), 3209-1408 (0.453" Lg) and 3209-1412 (0.703" Lg). 

Thanks Bill. 

[Wild Bill 633 877]

@John2189Please keep us informed how the E-Z Lok works out.

[John2189 536]

2 hours ago, Wild Bill 633 said:

@John2189Please keep us informed how the E-Z Lok works out.

Will do 

[siebenaler 114]

On 6/26/2024 at 8:14 PM, John2189 said:

Will do 

Good luck