Wheel Horse 616z Belts

[Jimmy Hoops 2]

I'm trying to locate a list of belts with part numbers for my mower. I found a manual online but it only list one of three belts on this unit.

[WHX?? 57,483]

Did you check with places like Parts Tree and such? 

Maybe a Toro dealer? 

 

Mid 90's Toro branded Z turn fellas. 

[Jimmy Hoops 2]

9 minutes ago, WHX?? said:

Did you check with places like Parts Tree and such? 

Maybe a Toro dealer? 

 

Mid 90's Toro branded Z turn fellas. 

 

Edited June 1, 2024 by Jimmy Hoops
Posted reply in the wrong place

[Jimmy Hoops 2]

The manual I found has a breakdown of the entire mower but it only lists one belt "V belt" but mine has three separate belts on it

[gwest_ca-(File Mod) 12,377]

See 1 belt on a transmission page

See 1 belt on a pto page

See 2 belts on a mower page

What is the model number and serial number on the tractor? 14 possibilities

What is the width of cut of the mower and side or rear discharge? 3 possibilities

 

[Jimmy Hoops 2]

Hopefully this helps. I'm not sure about the width of the mower but it's a side discharge.

[gwest_ca-(File Mod) 12,377]

Section 3 and 14 has 1 belt each

https://www.partstree.com/models/y1-16oe01-616-z-toro-zero-turn-mower-drive-unit-only-1989

 

Your mower is likely on this page. It will be a 38" or 42" side discharge. Will be an SY model and looks like the 38" has only 2 blades. Can not find the 1989 models but 1990 is likely the same.

https://www.partstree.com/models/05-38sy01-toro-38-side-discharge-mower-deck-1990

[gwest_ca-(File Mod) 12,377]

Transmission drive belt 116527 - (HA x 43.25" or 1/2" x 43.25")

 

Drive belt 116160 (Aftermarket replacements are 5/8" x 72") - Not in the belt chart
Spindle belt 116507 (Dimensions unknown) - Not in the belt chart

 

19 search results in our files for Y1-16OE01

https://www.wheelhorseforum.com/search/?q=Y1-16OE01&quick=1&type=downloads_file

[Jimmy Hoops 2]

Thank you. I'll have to do some more research.

[Josh G 0]

I am looking for the air cleaner assembly for my 616Z.  Any ideas where I can find a used or new assembly?  The plate is missing and everything.

[Terry M-(Moderator) 2,306]

23 minutes ago, Josh G said:

I am looking for the air cleaner assembly for my 616Z.  Any ideas where I can find a used or new assembly?  The plate is missing and everything.

Welcome to RS!!!

best place to start is putting an ad in the classifieds wanted section…

have you tried Toro.com?

[gwest_ca-(File Mod) 12,377]

 

1989?

[Josh G 0]

15 minutes ago, gwest_ca said:

 

1989?

 

[Josh G 0]

I have found the schematics but most has been discontinued 

[gwest_ca-(File Mod) 12,377]

Was hoping someone would know of a source or different application that used the same pieces.

[Gasaholic 385]

23 hours ago, Josh G said:

I have found the schematics but most has been discontinued 

https://www.toro.com/en/parts/partdetails?id=18346&srsltid=AfmBOoo5TlSgwH_ihGfzDo78oq_T5EKw50zXKOttnVXRryo73-JlNclZ&iid=308433&pid=318238  Yes most pieces are discontinued, but if you note down the part numbers and plug them in to like ebay search by the part number, and make a "saved search" you can get notifications when matching items come up for sale used , is often the only way to locate parts any more... plus sometimes you find "NOS" parts that come up now and then (often ridiculously overpriced but what something is worth is all about perception - what are you willing to spend to get it fixed up again?)