mike avad 46 #1 Posted May 27, 2024 I have a 36' wheel horse tiller I would like to mount it on a B-80 wheel horse how do I go about mount the rockshaft to the tiller there is a tub under the seat and would a 8HP 181 Kohler engine handle that am not sure where all the parts go to mount this tiller also I have everything but the lift cable? do I need the rockshaft also? am not able to post any photos. Thanks for any help info. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,471 #2 Posted May 27, 2024 Does your B-80 have 3 forward gears or 6? Looking back I see you have a 1978 B-80 but the last year for the B-80 8-speed was 1977. Here is the tiller sold in 1977. Not necessarily the tiller you have but the hook-up hardware in the illustrated parts list will show what was used. Later models should also fit with modifications. 2 1 Share this post Link to post Share on other sites
Pullstart 66,690 #3 Posted May 27, 2024 My 8 hp 8 speed 502 custom has the power to run a tiller, but not without low range to hold the tiller back from pushing me. 1 Share this post Link to post Share on other sites
Achto 29,388 #4 Posted May 27, 2024 6 hours ago, mike avad said: I have everything but the lift cable? https://wheelhorsepartsandmore.com/product-category/cables/ Share this post Link to post Share on other sites
WHX?? 51,732 #5 Posted May 28, 2024 (edited) The lift cable may have to be fabricated but the conduit should be there. The tiller mounts to a axle bracket & there might not be a rock shaft. Edited May 28, 2024 by WHX?? Share this post Link to post Share on other sites
