Fordiesel69 234 #1 Posted May 1 Really struggling to find a shop to do a regrind on a factory std worn k341 crank. Also not having luck finding a used one either. So I have an very old magnum 14 hp that takes a nutted style flywheel with the cast fins (instead of the bolted flywheel with the plastic fan disc.). Would this crankshaft be balanced correctly to work a k341 16hp. Reason I ask is a lot of old expired listi gs show the same part number for k321 and k341. Or conversely m14 and m16. But none shoe a k series to M series compatibility 1 Share this post Link to post Share on other sites
squonk 39,161 #2 Posted May 2 I have a crank out of an old K341. The rod broke up high. No idea on the out of round on the journal. If you're going to the show I can bring it along so you can look at it. Share this post Link to post Share on other sites