Mike'sHorseBarn 2,673 #1 Posted April 16 Thanks to @WHX?? this 1267 went from WI to PA! Saw it on Facebook several months ago and asked Jim if he was closeby and he was indeed. After some intersting interactions with the seller it finally went to his house. I believe he started a thread on that. Anyway, he took it to pullstarts plowday and I went out to get at his place in michigan. I'm super pumped to have this sweet machine in my collection! Chaged all the fluids tonight. Good thing too cause the crankcase was full of gas! It was probably because of a bad float jim fixed, but I rebuilt the fuel pump too for good measure. 2 10 Share this post Link to post Share on other sites
JimSraj 339 #2 Posted April 16 Sweet! Look at that seat. I’ve been told that style is original and looks like that one is nearly perfect. I really like my 1267. Just a real solid worker. 4 Share this post Link to post Share on other sites
Mike'sHorseBarn 2,673 #3 Posted April 16 10 minutes ago, JimSraj said: Sweet! Look at that seat. I’ve been told that style is original and looks like that one is nearly perfect. I really like my 1267. Just a real solid worker. It is original and you almost never see them!! They are really poor quality. 2 Share this post Link to post Share on other sites
JimSraj 339 #4 Posted April 16 Someone, I think it may have been squonk, said I should take it off the tractor, re ,ace it with a cheap one and put it in a museum. 2 1 Share this post Link to post Share on other sites
Pullstart 59,820 #5 Posted April 16 It drove real nice, when I unloaded it from the trailer! Good n tite Thanks again for the sausages, they were awesome on the smoker! 5 Share this post Link to post Share on other sites
ebinmaine 63,270 #7 Posted April 16 @Mike'sHorseBarn I'd second the usage of the replacement seat for usage of the tractor. That is a great worker. Plenty of power. Limited Slip Differential. Very nice find. @WHX?? well done. 1 1 Share this post Link to post Share on other sites
Retired Wrencher 4,886 #8 Posted April 16 Well Mike looks to be a fine workin tractor. Are you just going to mow with it? I would when you can give it a good cleaning so you can see if any leaks from the engine to the rear axels. I just did a 1057 this way will pay me back in the end. 4 Share this post Link to post Share on other sites
953 nut 51,881 #9 Posted April 16 Mike didn't mention the hitchhiker that jumped into his trailer for a ride. Several months ago I bought an electric A-60 which Jim and Dam picked up for me and brought to @Pullstart Plow Day. Mike then loaded it in his trailer for the ride east to PA where I will pick it up during the Big Show. Big thank you to @WHX??, @Achto and @Mike'sHorseBarn for pulling this off. The Wheel Horse Express works because of great people. 7 Share this post Link to post Share on other sites
Mike'sHorseBarn 2,673 #10 Posted April 16 1 minute ago, 953 nut said: Mike didn't mention the hitchhiker that jumped into his trailer for a ride. Several months ago I bought an electric A-60 which Jim and Dam picked up for me and brought to @Pullstart Plow Day. Mike then loaded it in his trailer for the ride east to PA where I will pick it up during the Big Show. Big thank you to @WHX??, @Achto and @Mike'sHorseBarn for pulling this off. The Wheel Horse Express works because of great people. Yep I did bring a hitchhiker and I gotta say it's a fun little thing to ride around on! 5 Share this post Link to post Share on other sites
Mike'sHorseBarn 2,673 #11 Posted 9 hours ago Had to fix that ugly exhaust and go back to the stock look. 1 Share this post Link to post Share on other sites
EB-80/8inPA 1,524 #12 Posted 7 hours ago (edited) On 4/15/2024 at 9:16 PM, JimSraj said: Sweet! Look at that seat. I’m having seat envy doing so. Nice! Edited 7 hours ago by EB-80/8inPA 1 Share this post Link to post Share on other sites
WHX?? 46,845 #13 Posted 6 hours ago On 4/16/2024 at 3:36 AM, ebinmaine said: I'd second the usage of the replacement seat for usage of the tractor. I'll third that ... you can have the seat I had on it. If you don't need it throw it in Pullstart's truck at the BS. I could use those pucks back that were under the seat tho. Newer style seats don't sit down in the pan right without them. Dan knows same thing as his 867. On 4/15/2024 at 7:09 PM, Mike'sHorseBarn said: Good thing too cause the crankcase was full of gas! Must have happened on the way to Pullstart's... the way Dan was driving... It was good when I loaded it. Did you clean the carb and check the float? Maybe my repair didn't hold?? I've never had any problems soldering brass. After a bit of running around check those hub screws. 1 Share this post Link to post Share on other sites