MTB Mike 1 #1 Posted March 27 We got the tractor running🤗 Now the next issue. I raised the hydraulic mower deck and now it is stuck in the up position and so far I haven’t been able to figure out how to get the hydraulic lift working again. Any suggestions? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,503 #2 Posted March 27 What year and model of tractor? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,503 #4 Posted March 27 The HY-3 lift was used 1964-65. Here is what we have on it https://www.wheelhorseforum.com/search/?q=hy-3&quick=1&type=downloads_file I will guess the earlier HY-2 would also work https://www.wheelhorseforum.com/search/?&q=hy-2&type=downloads_file&search_and_or=or&sortby=relevancy Some of the files may be duplicated. Share this post Link to post Share on other sites
Lane Ranger 10,495 #5 Posted March 27 Check the arm on the hydraulic cylinder . They can get rusty, damaged and dirty thus blocking movement of the left downwards. However, the weight of the mower deck should be sufficient to "drop" the deck. It sounds like you have something else binding it in place. 1 Share this post Link to post Share on other sites
Ed Kennell 35,814 #6 Posted March 27 Is it possible for the control lever to be slipping on the control valve? No experience with these units, just throwing it out there. Share this post Link to post Share on other sites
