6wheeler 603 #1 Posted March 16 More questions. Hi all. I am looking for a T handle for the throttle on my Electro 12. It has the locking throttle. It does work. But, I would like to have the T handle on it. I have just been using a pliers to pull and lock it. Has anyone replaced these? If so? Where did you get it? I will get some pics tomorrow with the tiller on the tractor. I tilled with it a little. So far? Not impressed. I think the tiller is going on the 165. I think the 8spd. would be much better with the tiller. Thanks Pat. Share this post Link to post Share on other sites
953 nut 54,842 #2 Posted March 16 Give Lincoln at A-Z Tractor a call, he should be able to fix you up. https://www.a-ztractor.com/ Share this post Link to post Share on other sites
Treepep 559 #3 Posted March 16 https://armyjeepparts.com has a nice T handle with a turn lock. What I put on my GT-14. I love it. what was on there was NOT original. Very frustrating. Best of luck acquiring what you like. Share this post Link to post Share on other sites
oliver2-44 9,573 #4 Posted March 16 Wheel Horse parts and more has them. https://wheelhorsepartsandmore.com/product/102185-throttle-t-knob-wheel-horse/ Share this post Link to post Share on other sites
kpinnc 11,795 #5 Posted March 16 19 hours ago, 6wheeler said: . I think the 8spd. would be much better with the tiller. Yes they are. A hydro will work, but you have to constantly work the hydro against the "push" of the tiller. The manual transmission in low range first will hold the tiller back. Share this post Link to post Share on other sites
kpinnc 11,795 #6 Posted March 16 19 hours ago, 6wheeler said: I have just been using a pliers to pull and lock it. If you replace it, and add a 1/16 roll pin it will last for years. I've done this on the three tractors I have with this throttle setup, and they've worked great. 3 Share this post Link to post Share on other sites