856 addict 2 #1 Posted March 4 Good morning fellas. I have been trying to find a pulley for my starter generator on a k181 and I have not yielded any results. Ive called a local shop that specializes in pulleys and other such things. They can not find what i am needing. Has anyone found a reliable replacement? Ive googled and searched the forums and have not found any. Its a 17mm on the I.D. and a 76mm on the O.D. takes a 1/2" belt and the keyway is a 1/8". Any help would be appreciated fellas Share this post Link to post Share on other sites
squonk 39,008 #2 Posted March 4 There is a good chance I have one. Got to go out and look 1 Share this post Link to post Share on other sites
squonk 39,008 #4 Posted March 4 6 minutes ago, Racinbob said: 3" x 5/8" bore? Sounds like it. Share this post Link to post Share on other sites
856 addict 2 #5 Posted March 4 the O.D. is 3" but im getting more like a 11/16's on the bore. The calipers show a .670" or a 17mm. When I bought the new generator they measured everything in metric so i assumed the pulley was metric as well. Share this post Link to post Share on other sites
Wild Bill 633 770 #6 Posted March 4 I believe it is Delco-Remy P/N 1949358, J&N P/N 201-12004. And for reference. https://www.ebay.com/itm/254980544700 2 Share this post Link to post Share on other sites
856 addict 2 #7 Posted March 4 Bill I appreciate it! Share this post Link to post Share on other sites
squonk 39,008 #8 Posted March 4 The pulley I have is ( metric wise) 16.7mm x 76.5mm .65" x 3" A couple of dings in the outer edge that won't hurt performance. PM me if interested. 2 Share this post Link to post Share on other sites
