GT 2500

[Easton Rich 621]

I’m looking at a get 2500 anniversary edition. The guy has no info no year but it is a square hood. Looks to be pretty decent for original. Come w. deck any downfalls on these? 

[gwest_ca-(File Mod) 11,442]

 

[Sparky-(Admin) 23,122]

 It’s a 1981 and was an anniversary model. Really the only cool factor was silver decals.  
 Otherwise it was made with leftover hoods/fenders etc from the older style WH’s. In 81 the current WH’s were the Black Hoods. 
  WH also used an 11HP Briggs and Stratton power plant. 

[Easton Rich 621]

Thanks. Much appreciated 

[Easton Rich 621]

One last thing, is that Briggs a good motor for a pulling tractor. 

[Sparky-(Admin) 23,122]

16 minutes ago, Easton Rich said:

One last thing, is that Briggs a good motor for a pulling tractor. 

I don’t know the specs on it, but I’m fairly certain it has less torque than the Kohler 10 or 12. Another thing to consider if it’s going to be a puller is that the GT-2500 has the smaller 1” axles and the 10 pinion rear, which is not the preferred rear end by the pulling crowd. 

[Easton Rich 621]

Are they keyed?

[Sparky-(Admin) 23,122]

There is a keyway on the axle and hub if that’s what you’re asking. 

[Easton Rich 621]

That is it. Thanks might just buy this one anyway for a mower and to turn over the garden THANK YOU SPARKY. You have helped me and saved me hours of research over the past 2yrs. Thanks for being so welcoming into this community.