Let’s talk TIRES

[sjoemie himself 3,232]

 

6 hours ago, Handy Don said:

29psi...

 Was mostly done to seat the bead since it was a tubeless tire. Customer came to pick it up and told me they run them at around 8 to 12psi normally. 

[RED-Z06 2,720]

My 416 just barely clears 24s without raising the fender, like...dont get your fingers between the tire and fender.

[ebinmaine 80,814]

2 hours ago, RED-Z06 said:

My 416 just barely clears 24s without raising the fender, like...dont get your fingers between the tire and fender.

 

Same on my '74 C160-8 

[Stan50 231]

Guys, I bought 2 turf tires 18x8.5x8 ,probably out of Husqvarna(rear ones), with 3/4" center bore,no bearings?,with key.

What can do with that? I was thinking about front tires,but these ones are maybe too big or wide (I've got regular 6"). Probably will need different spindles?.

I have 22x7.5x12 rear ones. Second purpose is my diy trailer, turf tires would be perfect fit. 

[Handy Don 17,516]

Yep, probably too big for fronts (rub on frame? bore length?)

Garden trailer seems likely, or some other implement.