Fire_rescue_18 0 #1 Posted August 16, 2009 I have a 310-8 with a kohler M10 on it and I need a carb shaft and bushing kit or a replacement carb. (sucking air around throttle shaft) The model number on my engine is 461521 and I cant seem to find a shaft kit or a carb without buying one new for 250.00. Any advice or guidance would be GREATLY appreciated!!!! Share this post Link to post Share on other sites
canam1991 2 #2 Posted August 16, 2009 try to find one around a tractor yard or small engine repair the carb was used on some other models i sure you can pick a good used one up for more than a $1 but less than $100 Share this post Link to post Share on other sites
WheelHorse_of_course 99 #3 Posted August 16, 2009 Check our Brian Wilson's site (from our links section) http://gardentractorpullingtips.com/a1carb.htm :thumbs2: Share this post Link to post Share on other sites
Fire_rescue_18 0 #4 Posted August 16, 2009 I have contacted him twice by phone and just e mailed him. I think they are extremely busy!! Hopefully he will contact me!! Share this post Link to post Share on other sites
TT-(Moderator) 1,129 #5 Posted August 16, 2009 Check our Brian Wilson's site (from our links section) That would be Brian Miller...... Brian Wilson is one of the Beach Boys. :thumbs2: Share this post Link to post Share on other sites
canam1991 2 #6 Posted August 16, 2009 :thumbs: thats right Share this post Link to post Share on other sites
Fire_rescue_18 0 #7 Posted August 16, 2009 I knew who he was talking about. Any other ideas?? Share this post Link to post Share on other sites
TT-(Moderator) 1,129 #8 Posted August 16, 2009 Look at the last three kits on this page and see if one of them will work: JSE link If all else fails, pay a visit to a local machine shop. Share this post Link to post Share on other sites
