Mike Reisinger 1 #1 Posted September 5, 2023 My dad owns a charger 12 tractor with a 48 inch deck model # 5-1482. I am working to get it in good working order and I am about done except for the DD center drive pulley. The part # is 6756. If an acceptable pulley cannot be found I am open to a new or used 3/4 spindle that is DD on the bottom and keyed on the top. I am told that these spindles and pulleys a more available. The 6756 pulley is a cast unit 5 inch two groove, bottom groove for the blades is 1/2 and the top is 5/8 to the motor. Mike 1 Share this post Link to post Share on other sites
Lane Ranger 10,530 #2 Posted September 5, 2023 fyi Mike regarding spindle size 1 Share this post Link to post Share on other sites
WHX?? 46,989 #4 Posted September 5, 2023 Mike I can look in my pulley bucket but doubt it i will have one. I'll look on my deck pile too. Best bet is to study the chart Lane provided for a possible replacement. Might not hurt to put a ad in classifieds wanted either. Just never know. 1 Share this post Link to post Share on other sites
Ed Kennell 35,997 #5 Posted September 6, 2023 I have a #106848 for a 42" deck. I don't know if it would work for a 48". Share this post Link to post Share on other sites
Mike Reisinger 1 #6 Posted September 6, 2023 I read somewhere that the updated part # for a 6756 is a 106848. I saw a 106848 on ebay and it was for a keyed shaft. Is yours keyed or DD? Share this post Link to post Share on other sites
Ed Kennell 35,997 #7 Posted September 6, 2023 1 hour ago, Mike Reisinger said: Is yours keyed or DD? Mine is DD. Share this post Link to post Share on other sites
Mike Reisinger 1 #8 Posted September 6, 2023 If the flats of the D are still flat I would be interested in buying it. email me at mrducks563@yahoo.com Share this post Link to post Share on other sites
Ed Kennell 35,997 #9 Posted September 6, 2023 2 hours ago, Mike Reisinger said: If the flats of the D are still flat I would be interested in buying it. email me at mrducks563@yahoo.com PM sent Share this post Link to post Share on other sites
