Jadenlathrop 0 #1 Posted August 7, 2023 (edited) I need help finding a belt for my 120C wheelhorse mower 42" Edited August 8, 2023 by Jadenlathrop Share this post Link to post Share on other sites
Sparky-(Admin) 23,147 #2 Posted August 7, 2023 Deck drive belt (engine to mower deck) or spindle belt (between the three mower blades). What size deck and ii it side or rear discharge. 2 Share this post Link to post Share on other sites
8ntruck 7,833 #3 Posted August 7, 2023 If the I.D./serial number tag is still on the deck, that information will be very useful in identifying what belt you need. 1 Share this post Link to post Share on other sites
peter lena 9,262 #4 Posted August 7, 2023 @Jadenlathrop realise you are at the starting point of that deck , typically , neglect , and collective drag / rust is an issue , while the belt is off , how do the blade / spindles / pulleys move / rough , lumpy ? have any deck rot ? blades shot ? if any of those awnsers are yes , you have a decision to make on making it right , pete Share this post Link to post Share on other sites
Jadenlathrop 0 #5 Posted August 8, 2023 #8ntruck how do I use the serial number to find belt Share this post Link to post Share on other sites
8ntruck 7,833 #6 Posted August 8, 2023 32 minutes ago, Jadenlathrop said: #8ntruck how do I use the serial number to find belt Actually, you need the model number from the deck. That will lead you to the Wheel Horse manual for that deck in the manuals section of the forum. I think that there is also a list by decks as to what belt is used where in the manuals section. Sorry. If I were a little more computer savy, I would have inserted a link here. Share this post Link to post Share on other sites
