Jon Paulsen 291 #1 Posted July 6, 2023 Anyone know the ID of the fuel hose for a 416-8 with the P216 twin? Chassis tag: 31160804 sn:2000815 Engine: P216G-I/10976D sn: L913868001 model: 795210 Wanted to replace it tonight and forgot my sample hose. Fuel system is a mess. Share this post Link to post Share on other sites
peter lena 9,242 #2 Posted July 6, 2023 @Jon Paulsen typically 1/4" to 5/16" , BTW a clear or colored vinyl fuel rated hose , will not break down like a rubber one will . don,t forget your fuel filters . pete 1 Share this post Link to post Share on other sites
Sparky-(Admin) 23,139 #3 Posted July 6, 2023 I just swapped all the lines in a 416H (Onan) that passed thru here a few weeks ago. 1/4” ID was the size 2 Share this post Link to post Share on other sites
Jon Paulsen 291 #4 Posted July 6, 2023 Thanks fellas. Appreciate it. I'll try 1/4" - I replaced a short section between the brown ( ) fuel filter and carb, new filter. New hose I had didn't state the size. I'm getting whatever auto parts has then ordering the good stuff, then flushing it all, rebuild carb, etc. Hope to do that after the summer heat. If it doesn't shape up I'll either park it and run the baby horse until fall, or do the maintenance so I can run it sooner. This one seems to be in very good condition except for a very ripped out seat and a lot of farm/barn dust and dirt. After disconnecting a trailer, nerve damage made my leg let go the clutch at idle, 3rd gear/high range. Nothing broke, engine didn't die, got wheelie 1 Share this post Link to post Share on other sites
