S416-8 388 #26 Posted June 12, 2023 (edited) Having the shop explains things a bit I don’t own a spring compressor but will look for a cheap one. I may use it only for this job. I sent my list to A to Z hope I hope to get a reply this week but will call if I don’t. I’m finding all types of things doing this so good that I’m. The loose bolts that I found in the head were leaking oil. The gaskets was never seated fully so had there were all kinds on carbon buildup. The good thing is everything is cleaning up great. Pistons have no play in them at all Everything is smooth as can be. i think in the end this will turn out great even doing it with the tools I have. Edited June 13, 2023 by S416-8 Errors Share this post Link to post Share on other sites
S416-8 388 #27 Posted June 14, 2023 Got everything ordered so hope I get the 20 back together the weekend.. Share this post Link to post Share on other sites
S416-8 388 #28 Posted June 16, 2023 Ordered my valve spring compressor tool and will have it this Sat. All the parts should be here by then so then it is assembly time... Share this post Link to post Share on other sites
S416-8 388 #29 Posted June 19, 2023 well started a new thread on this but it looks like that missing gasket around the oil filter did what I am reading about cause the valve seat on that side is loose. Guess I will need to check with the old dealer about boring it so I can get a new seat installed. Share this post Link to post Share on other sites