seat replacement

[gwood 16]

I have 3 Wheel Horse tractors needing seats. I've been to Tractor Supply and their bolt patterns don't show 7" wide by 71/2 " front to back and I called Northern Tool and the 3 they have also won't fit. 

Where have our members found seats for C-160 automatic, C-120 Automatic, etc.?  

[tunahead72 2,518]

You should be able to find several seats for your tractors.  I don't have my notes in front of me, but check your measurements -- somebody please correct me if I'm wrong, but I believe the bolt patterns should be 7-1/2" wide by 7" front to back (the reverse of what you said).

 

[Wayne0 947]

The Northern Tool seat fit fine on my 1987 Work Horse. Your instance may vary.

[8ntruck 7,404]

I just put a new Tractor Supply seat on my C-195.  There was a 7 1/2 wide by 7 long bolt pattern in the seat.  I had to drill and tap two holes to match the 7 1/2 wide by 8 long bolt pattern in the seat adjusters.

[SylvanLakeWH 27,611]

I've gotten two from AZ Tractor - a vendor on this site. Very nice, comfortable, perfect fit.

 

 

[gwood 16]

5 hours ago, tunahead72 said:

You should be able to find several seats for your tractors.  I don't have my notes in front of me, but check your measurements -- somebody please correct me if I'm wrong, but I believe the bolt patterns should be 7-1/2" wide by 7" front to back (the reverse of what you said).

Thanks 

 

[gwood 16]

5 hours ago, tunahead72 said:

You should be able to find several seats for your tractors.  I don't have my notes in front of me, but check your measurements -- somebody please correct me if I'm wrong, but I believe the bolt patterns should be 7-1/2" wide by 7" front to back (the reverse of what you said).

 

Thanks all of you who responded! I did screw up on the measurements and they are 71/2" wide x 7" front to back!