Kelly 1,033 #1 Posted August 4, 2009 I need to replace the drive belt on my 1075 so my Daughter can drive it this weekend at another show, but the dealer said it would be next week before they can get me one, so a TSC belt is going to have to do for now, but what size is it? Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #2 Posted August 5, 2009 I'm 99.9% positive that it should be a 72" long (by 1/2" wide) belt, Kelly. Share this post Link to post Share on other sites
C-Series14 15 #3 Posted August 5, 2009 TT is right on...WH part number 8005. Share this post Link to post Share on other sites
nylyon-(Admin) 8,120 #4 Posted August 5, 2009 From the Gates site: It's a Gates 6872 Belt / Sprocket Specifications Effective Length (In.) 72.18 Outside Circumference (In.) 72 Recommended Sheaves Light-Duty Sheaves-Bored-to-Size Light-Duty Sheaves-Variable Pitch Light-Duty Sheaves-Bushed Top Width (In.) .5 Top Width (mm) 13 So TT's 99.9 should be 100% Share this post Link to post Share on other sites
Kelly 1,033 #5 Posted August 5, 2009 Thanks off to TSC I go. Share this post Link to post Share on other sites
C-Series14 15 #6 Posted August 5, 2009 Don't forget the Jelly Belly jelly beans while you are there!!! :thumbs2: Share this post Link to post Share on other sites
Kelly 1,033 #7 Posted August 5, 2009 I only like the black jelly beans Share this post Link to post Share on other sites
