Crow Horse 8 #1 Posted July 30, 2009 I have a B-80 that is having a problem with the governor. The gov. works but the brass nut keeps backing out of the block. What would be the proper way to resolve this? Thanks....... All Good Medicine, Crow Share this post Link to post Share on other sites
TT-(Moderator) 1,127 #2 Posted July 30, 2009 :thumbs: Two suggestions: Loctite blue or remove the bushing nut and lightly "nick" the threads with a chisel so they bind slightly when tightening. Chances are it was over-torqued at some point in its life and the threads are pulled enough to keep it from holding. If all else fails, buy a new part. :thumbs2: Share this post Link to post Share on other sites
