Where Can I Buy A Seat?

[hotajax 229]

314-8.  Corners are all split and falling apart.  Thanks.  Prefer the original WH black.

[rmaynard 16,341]

Original WH seats are hard to come by, but they can usually be found at the big WHCC show in Arendtsville, PA in June.

[Retired Wrencher 5,822]

Keep an eye out here in classifieds here and attend tractors shows. Like Bob said and local shows. 

[Skwerl58 763]

Seats that work well are available at Tractor Supply and other farm stores. They will not have the logo but some are really good seats. I waited for them to have it on sale and jumped on the one attached here https://www.tractorsupply.com/tsc/product/countyline-universal-compact-seat-black-508000bk-cnl?cm_vc=-10005 and it fits me better and is more copmfortable than my original  seat. They usually have them on sale for around 50% off a couple of times a year.

[SPINJIM 1,986]

Northern Tool has a good selection of seats (sold online), a few very similar to the original WH.   Very difficult to find any seat with the original Wheel Horse logo.

[clueless 3,256]

The Milsco/ Michigan low back and high back that were the same as the seats but with out the logo that came on the later models, I think they were the company that produced the WH seats, are no longer available. Over the years I've bought several of them from Northern Tool and they were the exact same seats that I was replacing except no logo. The last three I bought were crap, after returning the first one the one they sent to replace it was even worse, the third wasn't great but decided to just keep it and try to make it work, it's still on the tractor but starting to come apart after 5 years of little use. That is probably why they quit making them.   

Edited May 11, 2023 by clueless

[Mike'sHorseBarn 3,251]

If you want a stock WH one, I have one for yours that is currently on a 1067 that I'm going to take off and sell as it's not original to my tractor. It doesn't have a single crack on it!

 

[peter lena 9,297]

@hotajax was just going to tell you to zero in on the seat measurement  schematic@ MIKES HORSE BARN     ,  has you covered on that . like that 303 pump spray bottle for boating vinyl , also make a point of lubricating the seat base mount threads , regularly solid rust / crud , make that go away , I  also like wider fender washers , in stress areas , stops the flexing / cracking start , pete

[Wayne0 1,209]

3 hours ago, SPINJIM said:

Northern Tool has a good selection of seats (sold online), a few very similar to the original WH.   Very difficult to find any seat with the original Wheel Horse logo.

I got mine from there and ti has served me well.

[SylvanLakeWH 28,503]

A-Z Tractors (a vendor here) has a good one. I've bought two with very good results...

 

[jtrosp1980 89]

If he doesn't take it message me I would be willing to purchase if it would fit my raider 10 I'm restoring 

[c-series don 10,107]

@jtrosp1980 If you are looking for a period correct seat for your Raider you will need a two piece seat. I don’t have a picture of one, someone else does I’m sure. Either way Wheel Horse logo seats are getting harder and harder to come by. 

[jtrosp1980 89]

The one that is on it isn't 2 piece I do know they are hard to come by