RandyLittrell 3,827 #1 Posted May 5, 2023 I know good and well, some of you have put a M14 in a C series but I can't seem to find any threads. I have a M14 that should be in good shape and would like to find a C series to put it in. If you guys could point me to some threads, that would be great!!! It is a stationary engine so I may need to swap some sheetmetal too. Randy Share this post Link to post Share on other sites
953 nut 51,899 #2 Posted May 5, 2023 Here is an easy wiring tip that could be helpful 1 Share this post Link to post Share on other sites
RandyLittrell 3,827 #4 Posted May 5, 2023 2 minutes ago, 953 nut said: Here is an easy wiring tip that could be helpful I will hang on to that, but this is a stationary motor so it is all built in. I will just relocate the switch and lengthen the battery cables and should be good!!Thanks for posting that! Randy 1 Share this post Link to post Share on other sites
RandyLittrell 3,827 #5 Posted May 5, 2023 (edited) I will say I am looking for a beater tractor to put this in to have something I can abuse without guilt!! So I will have no trouble doing some mods to it! Randy Edited May 5, 2023 by RandyLittrell Share this post Link to post Share on other sites
RandyLittrell 3,827 #6 Posted May 6, 2023 I just remembered Zach's Blackbeard tractor and his use of a M16 and that will be a perfect guide for what I would like to do!! Gonna go back and reread it and save some pics! Randy 1 Share this post Link to post Share on other sites