JustinW.73 224 #1 Posted March 12, 2023 Haven't been able to find anything on this yet. My neighbor and I picked up a couple 520Hs yesterday and one is a newer toro with the motion lever by the wheel. Previous owner didn't have it correct so we are trying to make it work again. Trying to figure out how the collar with the rod attached (the piece that interfaces with the s slot bracket with the neutral safety switch) attaches to the motion rod itself. I see there is a though hole on the rod for a pin and it looks like the collar accepts a pin, but the hole is much farther down on the rod that where the s bend bracket is so they will never line up. Maybe it's wrong parts, not sure. Does anyone have good pictures of there tractor in the column of this area? 1 Share this post Link to post Share on other sites
daveoman1966 3,624 #2 Posted March 12, 2023 THIS IS A 1997 520-h. maybe these help. 1 1 Share this post Link to post Share on other sites
JustinW.73 224 #3 Posted March 12, 2023 4 hours ago, daveoman1966 said: THIS IS A 1997 520-h. maybe these help. Thanks that does. After seeing this and looking through what pictures I can find, looks like we have a 416 lever. That's why it's not lining up correct Share this post Link to post Share on other sites
