Leaderboard

We had planned to get this girl long before post 515 so a 1000 mile round trip to MO and brought this one home. Wow I thought I was a empty nester! Whose Idea was this anyway? After this one is house broken gonna start looking for Don's @c-series don breed. I'm a glutton for punishment... Bonus on the trip ... had a nice visit with @ronwh and his wife Michelle. They live less than an hour from the breeder. Got to see his (my dream) smoker. Warning Ron if I make it down that way again there will be a 953 sickle bar coming home with me! Thank you guys for putting us up for a nite!

You could have used it to make penetrating oil by adding acetone at 1:1

Later that day, the first attempt to jump over said parking meter took place.

Good day all!! So, I went for a ride after church to a 312, way to rusted 42” RD and a long shute snowblower. The add said it ran, $275. Well, I got there…. And it ran fantastic. The old owner had changed the oil and put in a fuel filter, bonus!! It had a flat rear tire, starter switch (battery and solenoid!), an un torn seat and steel wheel weights! The snowblower was about a B-/ C+ in letter grade. The deck, so sad, it was unusable from the start!! So we struck a deal and i headed for home. The tire got changed right after i got it off the trailer and the starter switch got deleted shortly there after!! New spark plug, air filter, shift boot, rear end fluid and hot paint on the exhaust. I gotta do a new drive belt, because that belt has seen its day!! So, how I do for $170!!

July 16, 1935, The world’s first parking meter, known as Park-O-Meter No. 1, is installed on the southeast corner of what was then First Street and Robinson Avenue in Oklahoma City, Oklahoma. The parking meter was the brainchild of a man named Carl C. Magee, who moved to Oklahoma City from New Mexico in 1927. Magee had a colorful past: As a reporter for an Albuquerque newspaper, he had played a pivotal role in uncovering the so-called Teapot Dome Scandal (named for the Teapot Dome oil field in Wyoming), in which Albert B. Fall, then-secretary of the interior, was convicted of renting government lands to oil companies in return for personal loans and gifts. He also wrote a series of articles exposing corruption in the New Mexico court system, and was tried and acquitted of manslaughter after he shot at one of the judges targeted in the series during an altercation at a Las Vegas hotel.

No pic but we have a vintage parking meter in the driveway at the Spike Camp in northern WI. No idea where it came from and Dad is the only guy that knows the story behind it and he's long passed. Some day I'll restore it.

Many Wheel Horse steering applications use two Roll Pins, one inside the other. In the case of a GT-14 they are 5/16 X 1.5 with a 3/16 X 3/16 driven inside it.

I don't really remember what I did today, but I got paid for 14 hours for it.

I've only met Don in real life once but I think it's safe to say no one knows his breed.

That tractor should have "the dreaded 9 pin connector" in the wiring harness - a source of all sorts of electrical issues over time. Separate the halves and thoroughly inspect it for signs of corrosion & overheating. Repair / replace as necessary. My .

Thanks Karl. We are doing much better. So many people have been helping out. It's been such a blessing to see just how many good folks there are still out there! We got a huge camper upgrade just because of the generosity of the owner. We're now in a big "bus" as my kids call it, and it is so nice that it almost feels like home. Almost... In addition we will have temporary power on Monday which will be a massive help. Clean up crews will be back beginning tomorrow as well. Then we're just beginning the long process of tearing down and rebuilding. Not all of the house will come down but nearly all of the living space will be torn down or at least to the studs and floor joists in a large portion. And of course everything above the ceiling end to end for the entire house. BUT- we have been blessed and humbled by this and the response of everyone. We will be stronger on the backside of this!

I never go to the Chicago area. This is just one of the reasons. But you probably will get a bill in the mail in a couple months with a picture of your license plate. I've had that in a couple other states. Classic toll road logic - let's spend $20 to collect $4...

That looks more like the fuse holder. Click on this poor picture to see the complete diagram. You can also download the complete file from there. That is also where the start relay gets it's constant power from on the purple wire. Perhaps that connection has been compromised. The purple wire to the start relay should always have battery voltage - key on and key off.

Could have lots of uses still. Door hinges , honing oil, patina preserver or pour it under someone you don't like's brand new car. They'll think they got a lemon!

Thanks to him we have the awesome scene from "Cool Hand Luke" where he cuts off the parking meters!

1969 open grill, 70,71,72,73 were closed. Weights about 60 lbs, if I remember correctly. Helps keep front end down. Protects fuel tank too.

Ya, the hour meter is sitting down there, broken. Since the DC charge meter worked, i knew it had power! The tail lights even worked!

Toss it. Engine oil and gear oil has been proven to be non usable after 3 to 5 years. The anti foaming agents are out if suspension by then. If ATF has similar agents.... it's trash. And... WHY chance it. No sense taking a chance in ruining equipment.

We got to see the Big Boy today and we got a few videos of it along with our 59 Biscayne. 20260712_141811.mp4

1/2" x 103 from Tractor Supply

Franklin, NC, is a rather small city with a lot of churches with big parking lots. Many years ago the town leaders decide to install parking meters as a source of additional revenue, turned out the meters didn't bring in enough money to cover the wages of the one city employee who collected the coins. About three years later the meters were removed and downtown returned to normal.

Closing the loop: Evaporator is mostly plugged. We ended up not having the appropriate stuff at work to suck out the Freon, so when I took the car in to get a front axle shaft replaced I had them look at the AC. Initial diagnosis was expansion valve, but they also found the evaporator is clogged. They made an effort to flush it out, but no luck. Since I have zero desire to tear the dashboard out of this car and I'm not interested in paying $1500 to have it done, this vehicle will now be climate controlled: Whatever it is outside, it will be inside. Steve

Whatever your decision is with a sandblaster, make sure you have a larger diameter air hose going to it. Over the years I have seen several people toss out perfectly usable units while claiming they don't work well but didn't upgrade from the 1/4" diameter hose they use to air up tires.

Anyone with an open grill GT-14 might want it to protect the hard to find plastic gas tank

It's stopping in Knox this afternoon. We'll be there with the grandkids. A massive turnout is expected. If the crowds are too bad I've got a couple of alternative locations on backroads that would offer good shots after it leaves town but of course, it would be moving then.

Pump should be here today, I'll get the torch and BMFH ready. Nothing some duct tape and bubble gum can't fix. I'll take pictures

He may not wish to repeat that again!!

The fan gear to shaft connection is a classic "double shear" scenario. The present cotter pin gets twisted by the forces at the ends - one up, the other down and it reverses as you turn the tractor the other way until the material fails and the pin breaks into 3 piees due to metal fatigue. It is clearly being overloaded and not the proper fastener for the job.... My suggestion is to carefully drill out the hole thru both to 1/4 inch and upgrade to a spring pin or better yet, a coiled pin. If you go with the spring pin (aka tension pin), be sure to install it in the proper orientation. That would be with the split line in the direction of rotation, not 90 degrees off. The coiled pin has no orientation and is the better choice.

Looks good from what I can see. Great bones to start with. If you want to put it back to stock it’s missing the hour meter on the bottom right. But for $170 you made out great. I’ve got an identical tractor that I mow with that as long as it has gas, spark and air it goes and goes.

This drawing shows all of the components of the Starting system. Take a look at it and if you have further questions or need help deciphering the drawing we can help you. Need to know if the blue wire is light blue or dark blue. Be sure the PTO is off and all connections are clean and tight. PS; safety switches or relays are seldom the problem but that seems to be where everybody starts.

So you have a neighborhood "Karen" Few years ago we moved into town off of 14acres. It was a big change but due to my girlfriends health issues shes unable to drive so we needed to be where transportation is available for her Dr appts. Fortunately, we have great neighbors. My driveway is really close to house on right side. Shes retired clerk of court for our town & really nice lady. Shes not outside much but has a 5yr old Pug that just doesn't shut up! I dont ever say anything or complain because shes never complained about me making noise in garage or driveway. She told me I dont need her permission to drive up thru her back yard to easily access my trailer. Shes 82yrs old & I know she wont be my neighbor forever......I try to be respectful of time of day etc. Nice to have thas sorta "understanding"

Hello rmaynard Issue appears to be resolved, and thanks for your input Removed the Carb, disassembled for inspection and cleaning Checked spark which was intermittent per my finding Put it back together and it started right and did the yard with no problem MAX RPM on this Kohler K241 is rated at 3600. I set mine to about 3200 All good now Thanks Ken

Thanks guys and good advice Bob. Trouble is Cindy doesn't want to see her suffer even tho I tell her we'll know when the time is right. On a happy note we are going to pick up a new addition. A Westie pup in MO and hopefully have a visit with @ronwh We had this all planned out long before the bad news. Leaving right after the Portage Show.

The odd thing is too after researching them, some came from the factory without a hood so no hood is technically factory correct.

Ahh ... I would bet in his day he actually used them.

What would be the timing for the spark .080

Those yellow connections ain't good!

Every tractor is different. It's best to have it below the tank. On my 2005 Classic (pic above) the location was almost a no brainer. But it can't happen on a hydro. On my 76 I didn't like anything under the hood. The fuel tank and battery took up a lot of the space. I ended up mounting it under the seat and running the extra fuel line. This is the original install. That's a cheapie pump which failed about 3 football fields from the garage. A 42s has replaced it.

Same here. I live trap them, administer a dose of lead and return them to thier burrow. They are more than a nuisance. The burrows are a real danger to the horses and people. I spent seven days in the hospital with a shattered knee when I stepped in a hole while pheasant hunting.

Groundhogs are a nuisance species here in Michigan. Sure you can trap them live, but you cannot transport them anywhere else and release. From State website: Woodchucks may be live trapped, but cannot be moved off the property they were trapped. https://www.michigan.gov/dnr/managing-resources/wildlife/nuisance-wildlife/groundhog-woodchuck Legal to kill without a permit in Michigan.

Item #18 part number 932035? https://www.partstree.com/models/41-18ke01-418-c-toro-garden-tractor-1987/front-axle-and-steering-6/ A bit of searching comes up with 3/16" x 1-1/4" long cotter pin. That is a hefty pin. Make sure you do not have it shimmed too tight. There should be a few thousands of clearance between the gear teeth from full left to full right. No clearance and something has to give.

I have had no problems with the Carbole solid state pumps, they cost a bit more than the round "Thumper" pumps but are well worth it in my opinion.

Chasin' the train. I arrived in Cresson as it was leaving. Caught up with it in Derry. Pardon the narration. 20260711_140150.mp4

Thanks for the advice engine was running well then started to die and then no spark at all

Got her out, she's tiny, got her out and put her in the wood line. She keeps following me, started the tractor up she tried to climb on for a ride. I put her back in wood line and ran. Have not seen her since. That was different,

You are over thinking this situation. The condenser is on the negative side of the coil and has nothing to do with power to the fuel pump. You are just using the positive side wire at the coil as a convenient source of power that will be turned on and off with the keyswitch.