Leaderboard

Shall we get a " Poll" started? Chicken or Egg? Bed or Colossus?

Personally I would opt for a manufactured aluminum or steel flatbed. Just bolt it on and go after it gets back from having the rear axle done. This way you can start using it, as opposed to having it still outa commission for weeks/months/years etc. This is just an example, plenty of less expensive steel ones for sale.

We'll be there if it's the same place as last year. We slept in the truck in the parking lot and all you guys were crashed out already and it was only midnight. Party just gettin started when we get there. Dan kept hitting his head on the dash 'cause I parked down hill.

This is from the experience I went through the last couple days. It pertains to a B 100 that I picked up a few weeks ago. It’s been quite the experience with the wiring on this tractor. I was trying to fix someone else’s mistakes. Yesterday was I guess you called a head banger or scratcher. Be cause everything I did did not work. So today I guess you could call it a premonition early in the morning. I decided to use a jumper wire form the solenoid to the wire on the starter from the Solenoid.. Bingo it worked. So Squonk AKA Mike was interested how this came about. So I told him. He said the wire was bad. I thought how a 6ga wire could be bad with no bare spots and the contacts were clean and shiny. So as I changed the wire witch is a 4ga brand new. Bingo I have contact. I have had a few of this model in the past. So I guess you could say don’t assume everything is good just by looks. I am not good with electrical never took the time to learn it.. if you read this and liked it say something or give me a thumbs up. Enjoy all your projects. This is something apparently I didn’t follow when I was doing it.

Well this hood has been primer coated about 5 times, each after finding another ding to tap out and fix. Actually got another coat today. But it looks pretty good right now. I'll go over it tomorrow with 800 grit and scope it over once more. And I've made up my mind on the fuel pump. Now I have to figure out where to put the thing. Not alot of room on a 701 to hide an electric pump...

The Challanger made an overnight stop in Sedalia, Mo. We were living there at the time. We started east of town and watched it roll by, beat it back to town and watched it pull into the siding in town. The Big Boy went through Sedalia maybe 20 years ago. Was working. I saw the smoke, but not the locomotive. Those big articulated locomotives are impressive machines. There is one in the Henry Ford Museum in Detroit on static display. Always enjoy seeing it when I visit there - also the Ford GT 40 that Dan Gurney drove at Le Mans. We had a Finish exchange student for a year. The Henry Ford Museum was one of the places we visited. When we came upon that car, he asked what it was. I told him it was a Ferrari killer. An effective taunt, as he was a Ferrari fan and didn't hold Fords in high regard.

This will be the trail cam pic at @ebinmaine's place shortly after Colossus makes its first run...

You make sure @WHX?? comes in. I'll send him gas money if I have to!

I used to work with a quirky Process Engineer that was a Statistics Nut. He could tell you where every SuperBowl was played, who the Teams were, & the final score.... by memory. I just referred to him as "The StoreHouse of Worthless Knowledge". He was also narcoleptic - could, and did, fall asleep at the drop of a hat. Meetings, Lunch, it did not matter. In those moments, I referred to him as "Professor Haim Gonnanodoff"!! We left him at the Lunch table after eating many times...

I'm almost at the age where I need to transition to two gallon buckets, the fives just get too heavy and the ten gallon totes, foregit about it.

Poor uncle Jim gets no respect.

Then don't I'll send you a orginal. Signed The Purist.

A rubdown with Penetrol. It was thirsty and will get another...

Are any of you guys going to be able to go see this as it comes through the East for the 1st time?? I've seen it a couple times when it came through Geneva and West Chicago, Ill a couple years ago. It is worth it if you get the chance !! This is worth seeing ...there is only 1. Go on You Tube and check out it going through the Feather River in the Rockies. Out standing for sure!! A schedule...

Dan's a good driver but a terrible navigator. Little hard on the throttle but a good driver. I can only sleep in a moving vehicle if I am at the wheel...

Yup good kid for sure and becoming a man before my eyes!

One more strawberry/rhubarb pie. The strawberries are just starting to ripen.

Not a pet but, she is cute.

Uncle Jim tells Dan where to go and sleeps in the passenger seat the whole way. He’s wound up like an 8 day clock after a hard day of riding in his passenger princess seat!

Here is a bed I built some years ago. The sides would come off by loosening 2 bolts. In had a pin at the top with 2 clamps at the bottom and was as solid as a stock box. Solid enough I used the stock hardware to make a functioning tailgate. I cut the end of a box off that had the catches and straps to hold the tailgate. I used strap hinges so I could remove the tailgate and put a solid rod into to lock in the ramps. I put metal over the tires to keep the height lower and were removable so I could put in a flat piece if needed. But I do not think I ever needed to. This was built the size of a bed liner so it was smaller.

The biggest improvement I made as far as steering goes on a FEL was going to six ply tires and running them at 40 PSI. the thrust washers made no noticeable difference with a bucket full of soil or rocks.

I gotta start writing down what I do with crap.

Internal corrosion

Got her out, she's tiny, got her out and put her in the wood line. She keeps following me, started the tractor up she tried to climb on for a ride. I put her back in wood line and ran. Have not seen her since. That was different,

Sometimes an unlikely solution presents itself…we pulled JackRabbit out of long storage, checked oil, plugs, filters, and put in fresh fuel…it started and ran really well. We mounted a 48” SD deck and have cut the lawn a couple of times with no issues🙃😅😎 other than the engine isn’t charging. I remembered that after I got it running. There is no AC power to the regulator so I’m guessing either the stator is failing or the wires coming off it are. So, I find myself saying to Caleb, hang on to this one too OR… as of right now @Edward Teach (our youngest) wants to buy it from Caleb and restore it…I say “Why not?” Very nice cutting machine and I love the faster ground speed…

@squonk and @SylvanLakeWH Imagine if I ever got BOTH done.

Lemme know you need help. Did I mention I hoard them... I got one or three of them but none with the offset cam lever. I bet the bodies interchange. I gotta get off my @$$ and do that pump tutorial one of these days.

1999 Mars orbiter. $125 million satellite. Orbital data handed over by one team without units specified. Control team assumed different units and loaded accordingly. Crash. Apollo mission near catastrophe due to oxygen tank stirrer spec’d for lower voltage than actually used. Arcing. Bang. In engineering school, any answer presented without units was an automatic fail. Learned that lesson super quickly.

June 8, 1966, the rival National Football League (NFL) and American Football League (AFL) announce that they will merge. The first “Super Bowl” between the two leagues took place at the end of the 1966 season, though it took until the 1970 season for the leagues to unite their operations and integrate their regular-season schedules.

I’ll be there, flying solo this year. Hoping to see my friends and Uncle Jim too!

Y'all... ain't... right... I mean, yeah about that marriage thing but...

Who is in for the Wednesday night parking lot party at the hotel? I forget the name of the hotel but it is the usual one. I will be there with the camper again and yes I will have a cigar for Jo and Brian!

@parsonsponyz has dibs on but if he doesn't want it's fair game. $180.00

Well that sucks but you taught him to grow up so that's what he's doing. Count me in for the parking lot pre-show party! But not too much partying for me this year

I got this cream puff for $150 w/battery $125 without. Re-powered with Magnum 10, Smokes on startup, hydro is good and strong. Also got his 20 Ton shop press converted to Air Cylinder. $175

What you call a lifting master is normally called a fork lift here. Regardless of what you call it, that is a very handy tool for moving things around. You will probably wonder how you got along without one. The discussion on taps and dies brought to mind an adventure I had with one of my projects at work. The last position I had before retiring was the tooling engineer for the press department. As new products came into the plant, I was very involved in design and development of the new press dies to build the new product. The winning vendor for one job ended up being a Brazilian tool shop. Well, Brazil is a country that runs on the metric system. The plant I'm working in is in the middle of the US - deep in SAE territory. I specified that the bolts in these tools were to be SAE threads. SAE threads are also called English threads. I'm guessing that the tool shop had to buy some 'English' bolts and taps. What we actually got were Whitworth threads - a thread system that originated and was common in England in the 1st half ov the 20th century.

I'm there for sure. Every year when I get back from the Big Show, many unsold heavy items go on the scrappers pile. Last year I scrapped many axles and deck support hardware.

Gate don't open 'till 9 so we just stay up and party 'till 4. Show rules no drinking between 7 and 8 AM anyway. Leaves us a hour to sober up and git to the show. Didn't we crack one waiting in line for the gate to open @Pullstart?

12 is late when we left up at 4am to get to the grounds 😆 .

As @953 nut said, he's almost at that age where he needs to transition to 2-gallon buckets. Almost at the age? Well I'm not quite as old as you Dick, and I'm there already. I'm just bringing my brake linings. They are fairly easy to handle.

I would stick with original if I could get a rebuild kit. My luck must be bad and I got tired of waiting.

FIFY

The whole idea is to keep moisture and contaminants OUT of the connection. Dielectric grease will do the job just fine and I see no problem with having it IN the connection, the metal will be able to make a good contact with or without the grease. If the connection isn't tight enough to displace some grease it is going to overheat and fail anyway. Though it was made for Aluminum connections the Zink works well to protect connections of dissimilar metals and seals out the contaminants and moisture from any connection.

Anyone got the inside scoop and know what it is this year?? Let’s hope it’s not a rear engine rider with a 30” deck

Got some logs pulled outta the forest today.

It also appears like it's rubbing the PTO hoop. I think a 1/2" belt will slip on the PTO pulleys because they are designed for a wider 5/8 belt and not variable like many aftermarket pulleys are designed. Maybe that's why it's so tight but IDK. If the pump pulley will handle a wider belt then go with a wider belt. The suction hose doesn't have any pressure on it. But use a stiff hose because stronger suction pressure could collapse a flimsy hose. The reason for asking about the color is to see if it's ATF or motor oil. It possible it could've been changed to hydraulic fluid too.

On Sale!!! $400.00 $300. SOLD Working Man's 856. Fine fine steed that is ready to work. A real chick magnet. Pulled a plow nicely at plow day. Patina to die for. New to check list, some updated wiring, fluids changed, new shifter boot, new petcock, new carb & throttle cable. Good battery. Lots of TLC done. Left rear tire leaks air but very slowly. Service K181 runs great. Right rear hub a bit to wonder at but holds tight. If you wanna get fussy I'll throw in a good hub for a extra Jackson. No extra charge for broken in saddle.