Leaderboard

Celebrated on December 25th each year, Christmas Day is a holiday that commemorates the birth of Jesus Christ, who is the central figure of Christianity. It is a time for Christians around the world to come together and celebrate Jesus and the message of love, peace, and redemption that he brings. If you were a devoted viewer of MASH you will remember this one. If not, it is heartwarming and heart-wrenching at the same time and well worth watching. It may put a lump in your through or a tear in your eye, I find it very moving. Merry Christmas. https://www.youtube.com/watch?v=aEpkPF_X5UQ

Received this much appreciated Tee Shirt today. It also relates to Tractors... enjoy! Percussive Maintenance - Stuck Carb Needle High Impedance Air Gap - Rectifier Connector fell off Cycle Power to the Panel - Battery Charger not working Thermally Reconfigured - The dreaded 9-Pin Connector Kinetic Disassembly - Balance Gear Failures

Merry Christmas from the PeacemakerJack family. This is Coulter Caleb’s new house and his fiancée Faith (sitting on her 314H) along with the rest of our family. We started taking these Christmas tractor pictures 11 years ago…a lot has changed since that first picture. I’m so thankful for the many memories made through the years. As Tiny Tim observed, “God bless us…every one!”

Merry Christmas to all! Let us remember the greatest gift, and be happier to give than receive!

Pictured below is a gift and card (on nothing less than notebook paper.) my ten year old granddaughter gave me. She told me she bought me a Christmas gift (with her own money her mom said.) a couple of weeks ago. The school had some kind of sale and Gracelia found these pliers and snatched them up. The other side of the card said "TO: You FROM: Cece" These pliers will not likely be put to use on the 520H. They, along with the card, will be hanging on my "wall of memories" in the shop and remain there as long as I'm able to be out there tinkering around.

My wife had our neighbor (Mifflintown Metal Works) make me this shop sign for Christmas! Love it!!

One time on a work order I used the phrase " performed external auditory fuel level inference test, indicates fuel level may be too low for proper operation" because I didn't think the customer would like the wording "hit tank, sounds empty". Love that shirt BTW.

A nice sign. Some tooling for the lathe that I recently purchased and a tool box that will be dedicated to lathe tools.

Everything needed to save a New Tee Body hydrate....works better than those hospital IVs.

Exactly... that way we all can stay friends.....

I'd test it... In the immortal words of Ronald Reagan "Trust, but verify."

Around here we have good access to Non ethanol fuel. No ethanol. No additives. No problems. Dry gas is alcohol. Alcohol dries out rubber and possibly even damages aluminum. Carburetors are aluminum and have rubber seals. IMHO... do NOT use dry gas. This fall we put Sta-bil in the new generator gas tank. First time we've ever used it. Depending on how long the generator sets will be the answer for if we keep using the stabilizer.

Weld da hood shut baby. No more trouble wid dis one. Dry as mojave and purring like a kitten..

FYI. I've been told there can potentially be as much 3 gallons IN the pump assembly. Most of that won't likely matter but I've tried to be sure I get that as a minimum into the road vehicle. I also bought an ethanol tester. I've yet to use it though because I started buying my E free gas exclusively where the hoses are dedicated.

I wholeheartedly agree. If you have access to ethanol-free gas, you have all you need. It's expensive, but worth it. And if it is dispensed from the same pump as ethanol fuel, run the first gallon (or two) into your vehicle. Otherwise you have a blend of ethanol and ethanol free in your gas can. I've seen old trucks pulled from a barn with 1/4 tank of old gas in them, after setting for years that start and run with a jump. Good luck with ethanol fuel that is 90 days old.

Lock n flate adapter for tires, New Milwaukee batteries and a tractor seat with adjustable base.

While the experts prognosticate on the tractor's original pedigree, please post the seat in the ugly seat thread. It has a very nice green patch... every little bit helps with global warming...

Santa stopped by again this evening.

Made new plug wire for c160 in between family engagements’.

I still have the 1963 test that the shop teacher marked me wrong when I called that thing a slip joint pliers.

4 tires to my doorstep shows $60. That isn't bad at all. But that is more to ship the tire than the cost of the tire. Side note: 4 tires ship for the same as 1 tire. The calculator kicks higher only after 6 tires...

Not much. Some paint and primer and some 58087's for rebuilding carbs. Maybe next week a 1991 310 complete roller minus deck but with a blown motor. Lots of good parts though. RK gift cards later today I am sure.

Merry Christmas !

Merry Christmas to all. And Happy BIRTHDAY Jesus

Merry Christmas to all of you! May you have a wonderful time with your families.. or tractors

Merry Christmas everyone!!!

Got a few new ones this week. Taken from my back yard:

That seat was so badly rusted, rotted ruined it got tossed shortly after unloading. I guess this one might suffice. New posting area I wasn't aware of. And I have a LOT of ugly stuff!

Costco & HF... er... North Pole...

Somebody dun bin to the Wall-Mart...

Sending wishes of health, happiness, peace, and joy to all on this Sacred Day.

MERRY CHRISTMAS AND A GOOD YEAR AHEAD!

I agree a no no, find ethanol free fuel and have a happier maaachine.

Merry Christmas!

You can clearly see were I traced around pump, the newly made gaskets are in there.

Why all the snowmen decorum, and not of me! I've been slighted and disrespected. I think Karl may get some coal in his stockings this year.

I had my doubts this 16(14) Automatic "Johnny Cash" would ever be anything other than a parts donor, but here we are!

I didn't get a damn thing ... guess I just go out and get myself somethin. Best you keep an eye on them step bits Sylvia ... Pulstart around...

Yup, second that. And there are 364 other days to do the same...

Ratcheting plug wire crimpers ehh?

Happy Birthday @"Manic-Mechanic" we are all glad you were born.

@squonkYou know the rules....No pictures then it didnt happen...

Merry Christmas to my extended Wheel Horse family. May you all have a joyous day.

🙄 As we are all to well aware... marketing works whether you need a refrigerator in the Arctic or not.

Well, there is the naughty list I have to abide by.

No joke, when we looked at this property- the sunset was definitely part of the reasons we liked it so much. My pics are not altered at all. The first two were taken about 5 minutes behind the second two.

That old fat guy didn't even bring this miner a lump o coal for ten years. And I got his mug all over the place. Outside Peepin in the kitchen window On the tree Holding the nice list...that I must not be on. Maybe this is why Rudolph makes a U turn when he sees this. Anyway, I filled the stockings for ya. And there won't be any cookies for you. Merry Christmas to All My Wheel Horse Family