Leaderboard

A while back I refreshed this tub cart that was given to me with some paint and bed liner. I used it quite a bit for smaller tasks and it showed the usual bumps and bruises after a while. A couple months ago one of the tired split apart and there was no saving it. I found a pair of flat frees with wheels that would work fine so I ordered them. I don't understand why they put pneumatic on some things like 2-wheel dollies, wheelbarrows and in this case, small tub carts. They look great and I happened to have a couple caps in my stash that fit perfectly. A couple weeks ago I stumbled onto a quart of bedliner on a clearance shelf cheap so I grabbed it. Taking advantage of a very warm day yesterday I rolled some on the interior. I think it turned out great and hid the marks from the years of usage quite well. I figure this cart won't be seeing any work again because one that I got from @stevasaurus is far better suited. It's bigger, much heavier built and the tilt balance is perfect. Come spring it will get a refresh as well but continue to do what it was intended to do.

My nose too…

I'm in need of some new parts to do another custom John. Ya think Lincoln at A-Z could help? Here's a list of the parts I need to start a build 2 knees 2 hands 1 back

Today, I built a crime scene…. Happy Halloween!!!

@Bill D You beat me to it, I spoke with @Brockport Bill a while ago and he told me that he was looking for a good GT-1848 and that one certainly fits the bill. That’s a 1982-83, you can tell by the older style hydraulic lift handle. @pfrederi for what you paid, you got a heck of a deal. It’s one of the nicest Work Horses I’ve seen in a while, considering it’s over 40 years old someone took good care of it. Most of you guys know that I’ve been a huge Work Horse fan since I bought my new in 1984, and it’s still going strong.

Clea, rust free parts! 1056 As found 1056 As found 1056 Cleaned up and running again, Patches 701 As found Sometimes parts aren't pretty Unloading it however I can.

It's a mink feeder. Check out this link. https://www.wheelhorseforum.com/topic/83911-wheel-horse-mink-feeder/

Happy Halloween from Captain Morgan and his bar wench !!! Hope you all had fun with the holiday. Show off you, your kids, or grandkids costumes.

My stock answer when people see me in a back brace and cane and ask, "how are you doing Ed". Great, I woke up on the green side again this morning.

I"ll bring the welder to Gettyburg. We can probably find some stuff in those buckets to customize those for ya! LOL

Cats, rat snakes and anything else native that finds them delicious.😋

We used to have burn restrictions where we lived near the city. It was a pretty upity place to live. No bonfires were allowed, but cooking fires were. Well, I could have a cooking fire big enough to light up my back yard for the night, I just needed some burgers and marshmallows nearby!

To answer the wiring question, yes the push button to the starter is a different circuit than the ignition key. The ignition controls the coil, the push button only engages the starter/generator.

Well he owes all of us so don't worry about it ...

I think he said that dingus ... Yes we like the blue ones from TSC. My idler runs high too with a new belt but 82 is the correct belt. Only thing with the TSC belts is they will leave blue on the guard and it seems they need some break in to clutch proper.

I owe you Squonk! It's still on jack stands so it only took a second to check it. Spun both wheels forward and the brake drum turned! Thank you!

I have two GT1848 's and love both of them!! I Kohler swapped one of them. Your tractor looks very nice!!

I suppose I had best confess otherwise my dreams may consist of a plugged up Onan carburetor on the 520H. My name is Phil and I went fishing while the concrete finishers troweled the floor. I only caught one but was pleasantly surprised that the lily pads didn't cover 80% of the pond like they do most years. I was fighting wind gusts up to 52 mph. I didn't fish long because I also wanted to sight in my .380 with the new green laser pistol sight. Those miserable lily pads began to show up several years ago. Mom contacted the conservation agent and he encouraged her to keep them. What a pain they have become. She spent several dollars trying to rid the pond and we gave up as futile.

Needing a seat cover and no idea what model it was

@wallfish @ebinmaine I'm more out then in but I'm still in and out lol. Still burning mig wire, making interesting stuff but at the moment, nothing with an engine.

I responded with a HAHA only because I feel your pain, well most of it anyway. Of course I am MUCH YOUNGER, almost a year younger, so I know what to anticipate. Titanium miners are working overtime to keep us going. If you couldn't laugh about it that would make you cry and that's no fun.

I all ready have a guy scheduled to install two new knees in Feb. Bring your tools and we'll work on the back and hands in June.

LOL Maybe so. We definitely need some more kit-bashing builders though. @Ed Kennell was building some cool stuff for a while. Old Skool from Maine was going at it for a bit too with some real interesting stuff but he doesn't frequent as much anymore. Jay building his truck might be the only current big custom build going on right now, that I can remember

Since I made the one I have, that would be easy! Just need to do some testing to find the "sweet spot".

My preference is snap traps and raisins for the bait.

Updated picture of the 854 with the smaller muffler Chad Burris made, I think it fits the tractor better and love the sound of it.

A shorter link, or just drill a series of holes in the longer link to make the height adjustable.

You've been fertilized!!

Paul, you NEED that, the Work Horse is the Feature Tractor for the 2025 Big Show. You can head up the bid parade and tell Wild Bill the story behind it.

It’s pretty awesome finding links to old threads, and reading them like they are brand new… only to see I’ve already made responses and likes along the way!

Your belt rolling over is a good indication that you need a new belt.

You need the long frame for your 312-8. These frames all appear to be the long frame. The blades come in 42, 48, and 54" widths. I prefer the 48" blades as even when angled they clear a path wider than the rear tires. IMO, the 54" wide blades put too much side load making it difficult to steer. Yes, you do need the axle mounting bracket. I would not be concerned about the blade angle lever. They can easily be bent or a spacer added to move them out to clear the brake pedal.

Yes, you will need a rear axle bracket. If the Seller has that manyWH Plows I would be the has a rear axle bracket to throw in with the deal.

Ask @wallfish

Mulching or composting is safer than burning and much more environmentally friendly. I have been collecting and composting leaves for years and the compost is free garden gold.

in the interest of the "parts and disassembled" theme, how about these. Is this what they mean when they say "the decks are stacked..." ?

Hi everyone! New to this site and my first post. I’m working on a recently purchased 416-8 with the Kohler K341 engine. I’ve just begun to go through the systems and making some repairs. It starts, runs. Idles rough at times. It drives in both Hi and Lo ranges but the brakes did not work. The brake friction band was oily and almost gone and the brake pedal was stuck in the down position. I repaired both of these problems after reading through the archives here on this site. BTW…Thank You! to everyone as the information has been helpful. I also replaced the axle seals and the brake drum seal since they were leaking. After reinstalling the rear wheel hubs I checked the brake performance to see if the band needed adjusting. When I rotate the rear axle, the brake drum does not turn. I tested it in Hi and Lo range in forward and reverse…the drum doesn’t turn. I’m guessing this is bad news since it points to a broken woodruff key in the transmission? Is there something I’m missing or am I on the right track with my assessment? I’m guessing a broken woodruff key would prevent the brakes from functioning but still allow forward and rearward movement. Thank you for any help or advice you can give.

Absolutely. There's a Non Wheel Horse section just for that Anything creative is always interesting.

@shaggydoink yes that would work. Battery around 12v is at rest. Voltage up around 14 is charging. Easy as that

Run @Pullstart Run...!!!

I have had the best results with snap traps, but I did just order some of these bucket lids on the jungle site. Sometimes resetting 12 traps a day is not my favorite and I need a quick fix. They flourish around the chicken coop especially, which happens to be close to my shop.

oh, nevermind - I see you answered that above. I'm wondering if that works with hydraulic lifts? They don't put any down pressure even with the solid bar, do they?

Yes, the axle bracket is all you need. If you plan to use the blade for grading dirt, you may want the solid link down pressure bar. It is normally not required for snow plowing. I am concerned about the big loop in the fuel line getting caught. I would turn the valve to the left and shorten the fuel line removing the loop.

Now that is a Cart Queen for sure. Beautiful Bob.

Thanks for all the tips! yes I meant 312-8. And yes, 1" axles. Ordered a seal and shifter boot.

I mulch with my recycler deck. Blow the remnants into a pile. Then set my Flowtron Leaf eater in my dump cart and fine mulch those remnants. Drive to the garden and dump. Great way to spend a nice fall day.

Dragged my Honda 5hp powered 656 out of the shed today, hasn’t run in five months or so. Typical Honda...fired up on the third yank! Decided to do something I haven’t done in awhile, cruise the trail that @Docwheelhorse and I blazed years ago for our kids to tear up with quads and dirt bikes (and tractors of course). It poured like heck yesterday so plenty of wet and muddy spots but she never got stuck. Just took my time...2nd gear with the motor just above idle. Enjoy the pics! This is the widest and deepest water crossing. Probably 15’ across and a good 10” deep today! Hard to capture with a camera but this is a pretty steep hill, had to up the RPM’s before heading up this one. Tony’s “woods art”. Classic New England stone walls are everywhere around here. Tree down!!! Somebody call maintenance!! Long muddy uphill trek to get home. And you can just see my house thru the trees...home safely!

Oliver's are a great way to avoid the other Green thing.

Pullstart Stables 2024 April plow day . Sure wish my son would take pictures with the phone sideways .first two pictures I played with the lighting and contrast.