Leaderboard

@Stepney Spenser had mentioned wanting before and after pictures of the driveway at some point. Figured I'd share with the group. Trina took some material from the center and moved it to the sides. Also dug a couple water channels at the sides which aren't very evident in the pics. Here's 3 before: And 2 after: And a video:

You don't mean dads home built 4' wide Brinly style that I fixed back up a few years ago? So you can pull side ditches? I have one for the little diesels too.

Got a "Heads Up" from my neighbor about a sale with a Wheel Horse in the inventory. Went down to take a look and a funny thing happened.......I bought it 1966 Wheel Horse Model 876 with mower deck (no holes) Runs, (no smoke), hydro smooth, hydrolic lift, slot hitch, lights front and rear work, no dents and good tires $350

The clouds were on fire this morning!

I'm gonna stick my neck out......150 - 450.

to RedSquare! Oh wait.... it’s just been that long since I heard of this project! Almost forgot!

Now wait a minute. Are you tellin me that you don’t like my retro two tone, soft cushy, warm to the puttie high fashion seat??? Or, is this a covert ploy to get me to sell it to ya??

Pulled the SD card from the trail camera Wednesday to find this picture that was taken on 7-1-20. I didn't know I had a helper out back on the trails. For those of you that went for the trail ride at the M&G this is 20' off the main trail about 300' from the house that leads to the back section before you cross the brook on the left hand side. Unfortunately not the best picture. Any experts wish to guess the approximate weight .

I could use one like that at the cabin Jeff. Very hilly and sandy road washes out but a ditch like that then some rip rap in it would be the cat's meow. Tried to do it with a box scraper but just don't work. You guys have seen these pics before but what the heck..... no shovels were harmed in the making of these pictures!

I used to run a road grader for a living, and I still get a kick out of how well my 50” mid mount grader blade works on the dirt road I live on.

From my sisters kitchen window in SW Pa. Papa bear and Baby bear.

The guy across the street gave you good advice! Find a single cylinder 300 or 400 series machine and you’ll be all set. My opinion is that if you go with a 48” deck you might want to look for a 14hp machine. But with 3/4 of an acre a 42” deck would be perfect and a 312 or even a 310 would be sufficient.

We live in the woods and the back property line adjoins the US Forest service so there all sorts of critters. Haven't had and big bears (that we know of) but here are a couple that have stopped in for a snack.

Chris Sutton and I made our own.

If I haven’t yet mentioned, the valve stems all have a very close depth from a straight edge across the lower valve cover. I am on the way to re-assembly on this side then I’ll start it back up for a test listen. No big pulls or road tests until both sides have strong pushrods!

Mine's a home made 48" grader blade. Used a 60" road grader edge and cut it to 48". The pivot pin is a 7/8" Ford king pin. The frame is 2" channel.

There'll be fire on a mountain There'll be revival and bangin' drums There'll be screamin' and there'll be shoutin' When my country music Jesus comes - Eric Church

Sounds like it’s time to weld up a custom fuel tank

My buddy called asking where to buy one because he borrows mine so often... There’s a guy mid-state selling what I think he might have made. “Wheel Horse Type grader blades” or something like that. I sent him the link and his response was “they are asking a lot for those.” Mine to him was “I paid quite a bit for mine!” So useful, even with Jane the Commando 6 with a Tecky and no weight!

Tell ya what I think the best implement for a horse is a mid mount blade. I get why Dan @Achto was so stiff for one. Just wished I woulda had one when I had a gravel drive but still use it in the back lots. Tire ruts and spinouts grade right out!

She wanted to do her own her own way so with minimum help she’s creating this tractor on her own painting it herself following her mother and father footsteps!!! Giving it her own touch!

I was looking for a pic in one of my old posts tonight and realized I had signed up here in July 2019 and didn't post until I was about to finally buy my first WH in June 2020. What does that mean? I was searching for almost a year for my first WH, all the while lurking here soaking up knowledge from you crazy bastages. Thanks!

Anybody needs me for the next several hours I'll be staring at this pic......................

This is a mechanical fuel pump and it has a different diaphragm but the other mechanisms would at least give you an idea how it goes together! Hope it helps!

Or in a garage adjusting valves on a Duramax...

I can’t beliebe that I got sucked into this thread already...I know that it is an old thread from last winter getting a resuscitation but still...I haven’t finished furrow plowing or the remainder of my fall activities and so I don’t care to think too much about the long cold winter ahead but I must... Like many of you, I like to keep a blade tractor ready as well as a blower tractor. My diesel cub has a hydraulic turn 60” Haban blade that I’ve used for a decade to move snow that is around 6” or less. It will move more but that is the point that I transition to the beast... Kelli’s Dxi. With the deuce and modifications, this setup will move snow into the neighbors yard without breaking a sweat! Now that I have an FEL on this tractor, I had better buy another xi tractor before winter😂😂😂

@JCM @Stepney @Oldskool Lookie what my BBT brought home!! What are your local foods?

Last summer I witnessed a guy cutting grass on a vacant lot across the street from my house, the grass was at least one foot tall, I was impressed at the performance of his garden tractor which was a 414-8 Wheel Horse. Yesterday my 20 year old MTD Murray lawn tractor died, i.e. the 16 hp Briggs engine connecting rod broke. I don't think it makes sense to put any time or money into that old mower. I talked to the guy who was cutting the grass with the 414-8 Wheel Horse, he suggests buying a 312, 412, 314 or 414 Wheel Horse, with a manual transmission and Kohler engine. I a decent mechanic and have about 3/4 acre yard to mow. So, I am looking for some advice on choosing my first Wheel Horse, considering such issues as cost, parts availability and reliability. Thanks.

So your sayin I have to buy more tractors...no problem

Oh, in a can.. Interesting! As for the beans, cooked in a dutch oven or something similar I assume?

Brown bread is bread that's brown. Comes in a can. Awesomeness. Bean hole beans .... Dig a hole. Make a fire. Get it to charcoal. Drop in a pot o beans (pronounced bee-yuns) let em wahm up a while. Bean hole beans. ..... Oh yeah.

Bad news here Sparky ....you get a 867 you gotta have a matching 857..... ....I didn't make up them rules. I also read here somewhere the prerequisite to those two is a 876..... something to do with having short frames........sounds logical to me!

Thanks,.Sparky! It's just after midnight here and raining but I'm so tempted to nip outside and take photos! I'll take them tomorrow and post on here, thanks.

Careful Ed

You can make a small plate to mount the pump like I did on this M12.

@ebinmaine I added a bigger more air grabber compressor wheel when I rebuilt the turbo, then added larger up pipes to the turbo and down pipe away from the turbo, along with a boost increase valve which essentially slows the wastegate down. The turbo is internally wastegated. Along with that, the AirDog lift pump supplies the injection pump with more volume of fuel, so it effectively raises rail pressure, also increasing horsepower and cylinder pressure. So, there’s a bunch more punch for fairly cheap as far as dollars per horsepower goes vs a gas engine. I expect to feel a good 100hp more than stock, if not more.

Gave it a bath this morning to see what was under some of the mouse house and the old oil and grease. Not really too awful bad. The front tires are Wheel Horse Must be original Not sure what the device is in the third picture with the fuel hoses and the zip ties? Maybe a "Flux Converter"???????? BTW: Everyone liked the fancy seat cover so much, I decieded that I would put names in a hat and draw the lucky winner in a few days!!!!!!!

The heavier weight oil probably has higher shear resistance and fills in the clearances better. The same way heavier oil will boost oil pressure in a worn engine.

Grader gitter done Mid-mount front back options three Same effect flat dirt

The loader makes the difference. But if I didn't have the loader front weights would be needed. Of course the front drive axle helps.

On a mountaintop

That would be a good sight to see sitting in a tree with a bow in your lap!

I have the 3505 from here http://www.dirtdogmfg.com/Rear-Blades---35-Series-v-55.html....

Eric should be proud.... Paint plow split wood wonderful.. The misses done good !!! HAPPY FRIDAY EVERYONE !!!

@ebinmaine no rush buddy. The linkage I whipped up is acceptable for now, just lacks any fine adjustment. This thing is definitely worth putting the correct parts on. @Tractorhead the 'little tekky that could' is doing a great job- very impressed for 6 little horsepower! The metering rod in the idle well keeps sticking, I would like to skip the carb across the pavement and replace it with a Kohler carb haha, but keeping my temper in check. I think it will free itself up with some use. If this machine wasn't as nice and original as it is, it would have an 8hp Kohler on it. I have a pair of them sitting on the bench.

Like a butt blanket in a cold hunting seat!

This just did a low fly past the farm!

And a bit more progress....

Lucky man...!