Leaderboard

I found a few more old photos

Dittos on that. Great pictures. Might as well take the C-141 back in time as well.

I'm finally getting around to pulling the diesel engine out of the Dxi to replace the injection pump, no small task but doable, hopefully all goes well and I be part of the oil burning xi crowd , here's as far as I've gotten in the last few weeks, as well as having the injectors rebuilt I have a new replacement pump ready to go in as well as most of the gaskets I had gotten late last summer from Matt @bowextreme , the radiator, fan shroud ,and engine mounts were the hardest part of the disassemble process so far, Jeff.

I became a supporter a few days ago. Worth it

We used Saran Wrap or something like that on the 9" round Raytheon TV screen. What was amazing was that if you didn't draw the bridge over the river...he still made it across. Jim

We were too poor to buy the plastic sheet that you stuck to the TV screen, so my brother drew right on the TV screen.

When I brought my second WH home, my wife looked at me with that wife look and says "We're not a home for orphaned tractors". It was pretty funny.

I was 5 (1955) when we got a used 9" Zenith. The screen was so dim that we had to put a blanket over the TV and sit under the blanket to darken the room. Winky Dink came on Saturday mornings from 1953 to 1957.

To be a listed vendor here you must have at least two horses and one must be a Ride Away Senior that you narrowly snatched out of the hands of another member. Naw......just kidding....humor check .We would always welcome a member who has horse stuff for sale cause it's better than trying to get the stuff off Amazon and a whole lot better than that other popular auction site! Seriously pm one of the Mods (they're names are listed in blue) and they well get you started out on the right foot.

My first words are: Buy it! This actually a 1998 This 520xi is one of the five 5xi models offered by Toro Wheel Horse. I have a 520xi .along with a 518xi and 523Dxi. There was also a 520Lxi that had a water-cooled Kawasaki engine and power steering. The one downfall is that only the attachments made for the 5xi fit so your other Wheel Horse attachments won't fit. You won't be able to attach your 42" deck. I'm not sure how the widespread the marketplace was in your region for these tractors. It may affect finding other attachments, but they are out there. The plastic valance is probably cracked on 75% of these tractors. There actually is a sturdy steel bumper behind it. 1. Am I correct it does not have the "swept front axle"? (I've read most 97's do not) All of the 5xi models have a 52" wheelbase with the swept axle and a refined steering reduction system. It does have what they call "Smart Turn" which automatically, through a mechanical linkage, slows the tractor while turning. It was intended to keep the tractor from flipping if the operator had the cruise control engaged. 2. It does not have power steering....would I regret that? Two of my three do not have power steering. I actually find them to be more precise in driving. My Dxi has an additional 100 pounds on the front axle because of the diesel engine so I'm glad that one does. It is just personal preference. 3. Am I correct that my current attachments that fit my 1985 312-8 (42" deck ,long frame doze blade, grader blade, and tiller) will fit this tractor (since they fit all 300, 400, 500 series tractor)? The dozer blade may possible be able to be adapted but i am pretty sure the others won't without a lot of rework. The 52" is a good size deck for this tractor. 4. WH are somewhat rare in my area which means there usually a little pricier, but they all do show up for sale over time. So if I want a newer model should I be holding out for power steering and a swept front axle? I wouldn't hold out considering the price on this one. 5. Yes I have the WH addiction, but do ya'll see anything in the pictures and price that I'm missing Just check the hydro like you mentioned. Good luck and post any other questions.

I agree just for the pic uploads alone.

I personally think that is a very fair price. Someone could buy this and do it all with one tractor, but what kind of weirdo has one tractor? That would be just plain rediculous. I mean most people have around a dozen tractors don't they? Dennis help me out here!

Craig no hard feelings the guy started a bidding war in the phone I flew up there walked out of work hope to have a job tommorow .....

Here they are with the embossing painted I used Forney brand "china" markers,Jeff.

Looking at several Wheel Horse Tractors Found a Late 80's fully restored (new powder Coat Paint and decals) 2 stage snow blower, plow blade, mower deck, chains, wheel weights, hitch weights, extra chute for blower, extra belt, LED lights and a Wheel House Vinyl Cab with an LED light bar. Owner states work done three years ago and 20Hp Onan Motor has only 550 hours. What would be the Top Price you guys would pay for this? I think his price is a bit high but then again, everything is good to go and it is really sweet looking. Are the 1990 forward models any better? This thing is in Show Condition!! Thanks For your input Kevin

OK, how many played this.

Just watched the auction end at $845. Thank you to admins for bending the rules a little on this one.

Now that there is funny - I don't care who you are.............

Or Sgt. Preston of the Yukon.

Uh oh...playin' Dinky Winks under the blanket, huh?

Never heard of it... is there an age requirement... how old do you gotta be???

Let's just say my 520xi with 60" deck clevis hitch and 1100 hours set me back twice that asking price and the paint isn't as shiny as that one, if you want the "Cadillac" of lawn mowers the xi are the ones and keep the classics for all your acquired attachments as I have a single stage and 2stage blower, cab, snow blade, tiller, 3 48" mower decks and a vacuum bagger for the 520H's ,then just the 48" and 60" deck and snow blade for the xi, with the possibility of a single stage thrower coming soon, Jeff.

Most old Wheelhorse photos have children in them.There has to be something so right and so good with that combination .

Views of original type Lawn Ranger steering wheels

Saw this pop up on C/L today... of course, I called within the first couple hours it was listed. Told the seller I had cash in hand, and was immediately getting on the road... only to have him call me back... within 5 minutes, mind you...to say it was no longer available. Oh well, at least he had the decency to save me the wasted trip.

M-I-L seat?

I will be the exception to the rule. Limited space in my garage and a wife who is watching. So, in my defense, make one purchase and get everything at once. That way it's , well honey it all came with the purchase. It would be nice to have multiples

Here is some GT-1848 Work Horse eye candy that was on Ebay a few years ago. One year had in my opinion a nicer grey than the other years. If you like the smooth running twin automatics like I do, this is in my opinion the primo Work Horse model with the twin 18hp Briggs and the larger tires. This one is a beauty and if I recall it went for about a grand. Did anyone out there get it? :

I never heard of it either, we got our first TV in about '56; only thing I remember is feeling cheated because the political conventions were on and for two weeks I didn't get to see any of the cool stuff the other kids had been telling me about.

I'm 77 - never heard of it - course we didn't have tv until 1954...what planet was this on??

Evening all, As the title suggests I'm interested in knowing what model this tractor is. I have an idea but am seeking confirmation. Is it a good buy? The seller says: Welcome to our Auction of a Vintage Wheel Horse ??? . (Re-listed due to idiots who make bogus bids 😡) This is the model that every one wants but no one can seem to get ! The Wheel Horse ??? was working the last time it was used. But unfortunately it has lost its drive belt and it will need a fresh battery ! So is being sold a seen ! All four wheels are in great condition. This is a collectible item but will need restoration, a great project for an enthusiast Thanks in advance of all your ideas. Chris

No thanks not gonna dip into my C-161 fund either. I gave up @ 260 clams. I'll guess 900 ....closest winner gets to hang out with Squonk at the bus stop or have a sip out of Steve's mug....take your pick.

Just the BOAT, if you haven't bought it.

Looks like a 70's C or B series, can't really tell from the photo, + someone destroyed it with black spray paint. It's nothing "special" but it's a good tractor none the less. I would give it some love...

8hp? Can you expand? Why would you not want one? I'm UK based if it changes things!

Looks like maybe an 8HP. $50-$100 Not everyone wants that model .... I don't!

There's a lot of different places that sell what you need. I believe Eaton acquired Cessna. So try and find a Eaton pump dealer and take your pump in. Good chance they can match it up. I am sure there are also cheaper alternatives out there like mention with Surplus Center, Northern Tool,etc...... but if you don't know the particulars to your pump then you might have to take to a hydraulics shop to let them identify it.

While you are racing over to buy it (or why aren't you?) do note: classic attachments do not fit and "xi" attachments are much harder to locate. Some of the 20hp Kawasaki had a plastic cam gear that disintegrate. I don't have access to the year & serial right now but I'm pretty sure that yours is not affected. I thought all the 520xis had power steering! Pretty sure only the classic style 520s has a swept axle but you're most likely referring to the reduction steering that some had. Never heard of the "xi" s having that. If indeed it does not have PS then don't ever ride one that does. It is wonderful! The "xi"s are not only physically bigger but in my opinion a big step up from the classics.

Those look so cool. I didn't know powder would reflect so good. Very shiny. Kind of reminds me of how someone drinks tea with how your holding that camera. Sorry about the jab I had to point that out.

Well my bearings and seals arrived but I cant do anything until next week. I am anxious to put transmission back together. Im anxious to get it done period, I have been doing what the doctors instructed and taking it easy. Lots of coffee and internet. Sold a gun yesterday on Armslist and am trying to move a few more to free up some money for some gun stuff and tractor stuff. It sucks being on limited activity but it least its not during the nice months. Have a good day all.

Having never seen one in person, that is quite the find. I'm glad a RS member got it also. Curious about the timing of the phone calls. Sounds like Jason probably was on the way to get the tractor when Craig called and the seller was going to see who got there first. Not the way I would have handled an item I was selling, but I'm just guessing on what went down. Sorry for Craig, though, but at the same time happy that Jason scored it.

I'm more of a Kohler K-Series guy myself. Although we do have two Tecumsehs in the shop (my wife's Commando V8 and our Troy-Bilt Tomahawk chipper/shredder) and I can't complain cause both of them start on the second pull every time we need them. Keep telling myself I'm gonna order a new starter for the V8, then I look at the prices and decide the rope is a lot cheaper Now if I could just remember to quit leaving starter ropes laying around everywhere whenever I start the thing

I searched whole property nothing maybe in the huge piles of junk under the dirt . IMG_5946.MOV

Unfortunately that won't work, a gable blew over on top of me a couple of weeks ago, knocked me off a second story roof we were building. Fell onto a partial porch roof about 12 feet down, bruised some ribs pretty good, but still finished building it in a snowstorm! I'm pretty tough, she wouldn't buy it for a second.

Go to a Cub Cadet or John Deere dealer and price a comparable tractor with all that new. Whatever you pay for this WH you are looking at will seem like a great bargain! 2 more cents. Original condition is worth FAR more than reconditioned. Didn't say better, just worth far more. After what Craig wrote : GO BUY IT! RUN!

If you have a farm supply, decent hardware store, or TSC nearby, you should be to buy 10 feet of #40 chain for about $20.00. I have a 5xi single stage snowthrower and it is 32 links long. I can get two chains out of the 10 feet.

Someone beat Craig to a tractor ...I didn't think that was possible ! sorry for your bad luck ...let's just hope it was one of us guys so we can get it on the registry if it's a new find .

What might be more interesting is the history behind it....the who, what, when, where & how!?!?

Thank you kindly hermitman. I did just fine and actually got up to take another pain pill. I had a headache from not having coffee since yesterday so i got up , made some coffee and oatmeal and am finishing up while visiting Redsquare. Going to leave my wife a thank you note for her to see in the morning and go back to bed. Goodnight and thanks again for asking.

Was measuring out some Seafoam to add to fuel on top of a rusty old top of a 45 gallon drum I had cut out of the drum. I let one drop hit the lid. In 2 weeks that single drop had migrated to completely cover the top and started on the underside. Now I see Seafoam has a product they call Deep Creep and would not be surprised if it is the same product. Garry