Leaderboard

This is what I did,,,with what you have.....and,,,,,mine started with alot less.................I had no idea what a Wheel Horse was..... after 2 years of guessing together a look,,,,i found this sight,,,,,, after some bad guessing,,,,a few good suggestions i wound up with this.. 5 inches longer than my square hoods ...............i give you my,,,,..My 1961 Suburban

Here is what I did to repair the upper steering column bearing on 417A. Was not able to get the steering wheel off, so I cut the shaft, then welded it back together. This did prevent using the plastic cover to the upper column, so I just painted it black. Steering is good and tight now.

So I finally got the deck for my 401 put back together after more than a year of it sitting in my garage in pieces. This came as a box of parts along with the 401 I purchased last year. I blasted the deck, re-built the bearing carriers, found a pair of NOS blades on Evil Bay, found some replacement wheels at Harbor Freight, and used all stainless hardware. My kid says I need to lose the blue wheels. Kind of growing on me though. Other than touching up the paint on one of the shafts it's done. Leaving the side guards in their original clear coated patina. No plans to actually mow with it though.

It was a big hit with the trick-or-treaters last night!

For what ever reason the first thing I thought of was the old movie The dark Night of the Scare Crow, if anyone remembers it.... Nice job... There is a garden landscape place near me that I drive by ever day.. About a week ago as I was driving by a local garden nursery I noticed a few guys working on a tree on step ladders... On the second day as I was driving by I noticed they were still working on that tree, Now, on the third day when they were still at it I just thought to my self, man these guys just flat out suck in whatever they are trying to accomplish... I began to scratch my head a little... Yup you guessed it, a couple of dummies working on that tree but the REAL dummy was drivin a 70 orange Chevy pickup..

11-1-1967 Newman stars in Cool Hand Luke On this day in 1967, Cool Hand Luke, starring Paul Newman as a tough, anti-authoritarian, poker-playing prisoner, debuts in theaters. Newman received a Best Actor Oscar nomination for his portrayal of the jail-breaking Luke Jackson, whom the American Film Institute in 2003 named one of the top 50 greatest movie heroes in history. For his role as the chain-gang boss, Dragline, co-star George Jackson collected a Best Supporting Actor Oscar. Directed by Stuart Rosenberg (Voyage of the Damned, The Amityville Horror, The Pope of Greenwich Village), Cool Hand Luke contained the now-famous lines: “What we have here is a failure to communicate” and “I don’t care if it rains or freezes, long as I have my plastic Jesus, right here on the dashboard of my car…” At the time of Cool Hand Luke’s debut, Paul Newman was already on the path to becoming one of Hollywood’s greatest leading men. The actor, who was born January 26, 1925, in Cleveland and raised in Shaker Heights, Ohio, served in the U.S. Navy during World War II and later graduated from Kenyon College. He acted on Broadway in the early 1950s and made his big-screen debut in 1954’s The Silver Chalice. Newman received his first Best Actor Oscar nomination for his performance as Brick Pollitt in 1958’s Cat on a Hot Tin Roof, based on the Tennessee Williams play and co-starring Elizabeth Taylor. Newman’s next two Best Actor Oscar nominations came for The Hustler (1961) and Hud (1963)

Beautiful night for trick-or-treating here. Happy Halloween!

Such a nice day today. I put the new tires on the front of the 702. To make it even out, I had a set of 6-12 ags on yellow rims, that I went ahead and put on the back. I hid the yellow rims by putting on wheel weights. The 416-8 and 551 also came out to enjoy the day. Busy day, as I also had to clean up the plow tractor and plow from yesterday's plow day.

Hi guys and girls. I am new here and new to the world of Wheelhorse. Love the site. Tons of information but I am still having some questions. I guess first I need to figure out what I have. I believe it to be a 60 or 61. It did not have original motor on it and I believe a different tranny. The frame was lengthened not sure if reason was motor or tranny or both. Here are some pics. Any and all help is appreciated.

sarge. I put on a genuine toro drive belt. 90 percent of the time I have bought the genuine belt. although I DO have snoblower spares from other manufacturers. I did not want to chance it on the main belt for a few dollar savings. BTW fellas, its running great.... I need a little help here. cant find it in the manual. but I noticed taking the deck off that the lift piston was connected to nothing, when I reached up and found out the attachment point. there is no attachment pin..bolt..clevis and pin.....I put a picture of the 2 attachment points. What exactly attaches them, I am guessing a pin and clevis????? Do any of you fellas know the correct part number? BIG THANKS also, dropping the trans fluid right now I have no idea what this guy has in there,,,,,some home made concoction. this blackhood is really growing on me. Glenn

I finally got a chance to check out our pics from Saturday. First I'll return the favor and post one of Josh and Ghostrider since he got some good ones of us. We need to get him a better hat Our first pass of the day was with the C-160. Even with my younger son's 45ish pounds in the seat it pulled the 10" well. He let me have a turn on the way back, although he didn't last long sitting on my lap. After getting a taste of driving by himself, riding with me kind of lost it's appeal. Things went pretty smoothly most of the day, but did get stuck in a traffic jam when a tractor ahead of us ran out of gas. It was OK because it gave us time to check out the white Case and the Panzer. The Cases, this white one and an orange one just like it, seemed be some of the best plowing tractors there. They just hooked up and plowed and didn't seem to struggle for traction when alot of the rest of us did. I thought the Panzer was the most unique tractor there. My favorite pass of the day was with my younger son on the B-100, and older son pulling Grandma and Grandpa on the hayrack so they could watch up-close. A proud moment having both boys doing a good job driving tractors on either side of me. The most nerve-wracking pass of the day... The parade lap. You can see Josh on the side taking video of what wasn't one of our finer moments of the day. It was some of the toughest ground we plowed. At first the tractor hooked up and my son gave it too much speed before I bumped up the throttle and he killed it. Then we couldn't get enough traction with just him in the seat so I had to ride with him. Even though our 10" plow came with the B100 when we got it, we just ran an 8" plow with it on Saturday. While it's furrows weren't as impressive as the 10" plows, it's much easier to use if you just want to have some fun. I didn't get any pictures, but I did make a round with the 854 after the parade lap. You get some funny looks on a little tractor like that among all the bigger plow tractors, but for the most part it kept up just fine in 2nd gear with the 8" plow. I did have to be careful which tractor I followed because some of the furrows were too deep for it. Like I said before, it was a great day for tractors, family and friends. Already looking forward to 2018!

Time for an update! I have gotten to put the tractor to work doing a little hauling after fitting an air cleaner to the engine and mounting a new fuel tank where it is supposed to be. Today I finished mounting a rear tire after sandblasting and painting the wheel. It is coming along bit by bit!

Whatchya talk'n 'bout Willis? @stevasaurus

Ok it's a 10410 7 Also the guy said it would turn over but not fire.... it it was missing the spark plug and the fuel line was shut off. Put a plug in it, opened the line. Fired right up. Very smooth sounding

That was Andre the Giant's suburban...a classic horse. It is not often, that I disagree with Walfish, but that trans looks like a regular 3 speed. It could be a 5007 (1961) or a 5025. It looks to me like the brake drum is on the mushroom gear in the pictures.

Does this tractor seat make my butt look big?? Nice looking 702.

I agree!!I Just something about those front AG's .

Well, sorry this happened to you. CLG253, you have been called to do this. The Universe needs another one of these. The 2.5 hp motor is so awesome

You should leave it running.

I pee every morning at 4:30. Problem is that I don't wake until 5. 😩 Mark

I just did a deal with A-Z Tractor, very nice to deal with and lots of good stuff at good prices.

REDRANGR...Thanks...I owe you one there. I did not know how to spell Uecker...but I was hoping somebody remembered that commercial. Thanks Mate... "Oh...I must be in the front row." One of the best lines ever. go CUBS.

I was going to tell you that it was the "Crawling Dead" but several others took my lead... Your question has been answered better than I was going to! Wish YouTube and the Internet had been around when I was young!

"Ya can't say isn't educational!

Looks like you and Walt have this plow angle lever issue resolved @T-Mo. Here is a pic of the mod I had to do to clear the foot control pedal on my 312H.

See if any of this helps you out Russ....I knew it was in here somewhere! .

Didn't we just go thru this... you musta been sleeping at the switch Russell There was just a good thread a while back about this ...I'll see if I can help you find it!

Clearly safe by a mile!!

Less chance of flipping over backwards too. No wheelies!

We call her Fat Betty....its the wide rear end ya know... CLG

Thanks for the recommendation. Lowell is nice guy! He's sending me the lift flag with non-Hydro spring bracket, the spring and a used lift pole. This way I can use the snow thrower on both the 520H and 312-8 if need be. Not sure if we'll enough snow for that this year but it's good to have all of the parts if I need them.

If it were me and I decided I wanted another tractor I'd try to determine where that oil is going and if it needed a rebuild. It would be much cheaper to put a good used Kohler on it then to rebuild that Onan. That would also only make sense if the Eaton 700 is still strong.. I had a 518 H that I bought before I knew they had the weaker hydro in them. The hydro worked good at the time but I knew it wouldn't hold up to my preferred style of pushing snow, which could probably be best described as hot n heavy... I like to go in hot and I like to push heavy snow. I'm not the type that enjoys plowing with the storm. I enjoy it most when the tractor has to really work so I typically wait until the storm is over... At the end of the day do what ever makes the most sense for you..

Those AG's make that tractor look like its all work and no play. Nice collection T-Mo

Welcome, looks like a 61 suburban front frame and hood and a unidrive trans off of another early to mid sixties wheel horse.

Needs a half a gallon of ketchup spread around.

16 6.50 8 measured at the middle of the bead.

Three stages of old age.1 you forget to zip up after you pee.2 you forget unzip before you pee.3 you don't worry about the zipper at all. JAinVA

Howdy everyone, I just picked up a B-100 along with mowing deck, hitch, chains and plow! I think it's a '74 but not sure. Runs like a champ and I can't wait to get cutting up some leaves and grass next weekend. It's my first tractor for my first real house and yard. I plan to work the tractor. It's in fairly good shape for being even older than me, just some faded paint but very little rust. It's missing it's headlight lens though and I'd like to find one since I may be plowing at night this winter. I plan on really going through the cutting deck this winter and getting new blades and making sure it's ready for next year. I'd also like to find a suitable utility trailer for the yard.

I bit the bullet and bought 10.5 x 12 rim blanks and centers from miller tire. I also bought 26x12x12 firestone floatation 23s from miller tire. Here are the pics of making them.

So I decided to see if anyone was interested in the 310-8 that I had picked up along with my 417-8. I had a guy contact me about a trade for a cub cadet tiller. I decided to go along with the deal (made my wife happy, but his pry not so much lol). I told my wife I should be a salesman after that deal.

It was a guess about being later based on the shape of the shifter. A 551 trans would have a straight shifter, can't remember on a 701. I also call anything that isn't an 8 speed a 4 speed

That 702 looks bad ass with the ags all around!! Randy

Always liked the venting talk. the best part I like is using the hot air for heating the cab in the winter. Glenn

It's just going to get a good cleaning and new fluids then preserved, if I restored it or repainted it then all the original is gone and it wouldn't be grandpa's anymore.

Don't feel bad those moments happen to all of us. I was working on a generator a couple days ago...unit had been sitting for two or three years so as you can imagine the carb was pretty gummed up. Took everything apart, cleaned it and got it all back together, but still would not start, pondered on it for several minutes before discovering I had forgotten to hook the plug wire back up, I had unhooked it to get it out of the way while removing the carburetor, I felt like a true idiot for a few hrs after that too.

Yep works great

I buy toro belts, works for me.

Don't feel to bad about it.If we are all honest we have had similar moments.At least you didn't give up and solved the problem.Two bad floats at one instant of time to the same owner has got to be a rare occurance.Luck,JAinVA

Man..........thats some real meat....no cheese required.!!!!!!!!!!!! I like um.....!! thse are 24x12x12 on 12 inch rims....... But im liked the AG's alot !!!!!