Leaderboard

Replaced the belts and plug, changed the engine and transmission oils, new filters, reset high/low carborator mixture, and adjusted the points. It runs like good music. 50 year old 1067. Probably my favorite.

Maybe it's just me..... But WHY would anybody want to sell that in the first place???

Picked this up last night. Another 4 to grab yet this week!

Terry, thank you for all you do for the forum, and even more... the entire hobby! Looking forward to finally meeting you in person! Please include logos for Marine Corps and WHCC member

Aldon you did an awesome job can't wait to see it in person at the big show. I sure do hope this hot mess will look like yours someday. I'm getting there just don't have the time right now

Still something weird with loading pics but I was able to get these loaded. Now back to wiring:-)

Great! My original was number 10. If it's not a total pain, please use this image instead of the original. I think the decals look awesome!

Hi Racinbob, Thanks for such an immediate response. As I was reversing the old girl back to the garage to start removing the shifter (we call it the gearstick over here!) the gearstick freed itself and I now have all gears again. I guess I must have started to select reverse gear before I had fully stopped moving and the shifter and the gear selectors hadn't engaged properly. Anyway now I have found this forum I will pop by from time to time. I have never rebuilt my wheelhorse as I have been too busy rebuilding a couple of old cars that I have but scanning this site you guys seem to be able to keep Wheelhorses going forever which is great. Perhaps one day I'll give mine some real attention rather than just using it. Thanks again for your help. Keith

Why not turn it into one of these?

It's been too long since I posted any pictures and when I did they were in winter mode. Here's some spring stuff.

I think I'm going to jump on it. I think I'd kick myself in the butt if i didn't.

Make sure you warn him Terry some of us ain't right#

I told the owner to register to the forum so he can read all your knowledgeable posts. Thanks for all the responses. I am sure it will enable him to save another round hood.

Only 1960 came with flames on the hood.

The first thing you need to do is remove the shifter. Look down the hole and you'll see the shift forks. Use a screwdriver and slide them until they look like this. Replace the shifter with the ball at the end in the rectangular hole making sure the dogpoint setscrew goes in the hole in the front of the ring. Tighten the setscrew until some resistance is felt as you shift through the gears then back off a fuzz and tighten the locknut holding the set screw in place as you do so. If that doesn't fix it, get back to us. .

5-20-1873 Levi Strauss and Jacob Davis receive patent for blue jeans On this day in 1873, San Francisco businessman Levi Strauss and Reno, Nevada, tailor Jacob Davis are given a patent to create work pants reinforced with metal rivets, marking the birth of one of the world’s most famous garments: blue jeans. Born Loeb Strauss in Buttenheim, Bavaria, in 1829, the young Strauss immigrated to New York with his family in 1847 after the death of his father. By 1850, Loeb had changed his name to Levi and was working in the family dry goods business, J. Strauss Brother & Co. In early 1853, Levi Strauss went west to seek his fortune during the heady days of the Gold Rush. In San Francisco, Strauss established a wholesale dry goods business under his own name and worked as the West Coast representative of his family’s firm. His new business imported clothing, fabric and other dry goods to sell in the small stores opening all over California and other Western states to supply the rapidly expanding communities of gold miners and other settlers. By 1866, Strauss had moved his company to expanded headquarters and was a well-known businessman and supporter of the Jewish community in San Francisco. Jacob Davis, a tailor in Reno, Nevada, was one of Levi Strauss’ regular customers. In 1872, he wrote a letter to Strauss about his method of making work pants with metal rivets on the stress points–at the corners of the pockets and the base of the button fly–to make them stronger. As Davis didn’t have the money for the necessary paperwork, he suggested that Strauss provide the funds and that the two men get the patent together. Strauss agreed enthusiastically, and the patent for “Improvement in Fastening Pocket-Openings”–the innovation that would produce blue jeans as we know them–was granted to both men on May 20, 1873. Strauss brought Davis to San Francisco to oversee the first manufacturing facility for “waist overalls,” as the original jeans were known. At first they employed seamstresses working out of their homes, but by the 1880s, Strauss had opened his own factory. The famous 501brand jean–known until 1890 as “XX”–was soon a bestseller, and the company grew quickly. By the 1920s, Levi’s denim waist overalls were the top-selling men’s work pant in the United States. As decades passed, the craze only grew, and now blue jeans are worn by men and women, young and old, around the world.

Got some new pics of progress on the 552 (I don't know how to turn them right side up?). I made the steering tie rods out of an old Massey since the original bar had no adjustments at all. everyone seems to like that Techumseh HC55, but I'm trying to find out what's so special about it? can someone send me photos of the wiring schematic for it? the diagram in the manuals I have are very basic drawings, and not specific to this engine. thanks for looking.

I have a customer who is new to Wheel horse ad needs to find out what he has and what has been modified. All help is appreciated. Larger images

Cents the hitch is on the plow, 175 is a good price for the plow. Those decks are going for $250-$300 around here. $350 is good for the tiller, and the blower depends on if a big snowstorm just hit!

Keith..... and I'm chuffed to bits (that means very happy. FYI USA members... ) your horse is now able to have a forward direction. It's much easier to sip that room temp. beer driving forward while mowing than backwards...... By the way..... I've been stuck in reverse most of my life..........

A 312-8 is very capable of pulling a 10" plow and the sleeve hitch from any 1963 or later will fit. there is a cable assembly that runs from the rocker shaft back to the sleeve hitch that will be needed too. The hitch can be found on and a vendor on this site, @wheelhorseman1000 can probably fix you up with the cable. He also makes hitches, so check out his vendor page.

Looks like you have the hardest part done. Dissassembly! And the chassis looks great!

Here is the link you want to look at... When you look at this, you will find the numbers of blowers that will fit on your horse. I would think that most of the "B", "C" series blowers would also fit. Snow blades verses snow blowers. Snow blades work better with wet snow, and not too deep of snow. You have to have a place to push it. Snow blowers work best with dryer snow and can go deep. I suggest one of each...especially being in the snow belt like you are.

and the black seat and fenders and silver wheels.

Cool pics. Beautiful lawn too..the red horses really stand out nicely against the green backdrop. (Unlike other machines that blend in with a green lawn). Sorry, I had to.

Yessir, atleast one today. A Raider 9 with deck, plow, snowblade, and disc tomorrow, and a small collection sunday that I've decided I already need 2 of! It has raider 10 decals on it, but he claims it is in fact a 9.

1-0481 was built in 1975.

That is just a casting number of that particular part by the company that actually cast it. The total assembled transmission is Wheel Horse part #5010. The other number K28-9 is the date. K= Oct (no letter I, because it could be confused with number 1) 28 = Oct 28 -9 = 1959 That tractor is a 400

Good friends await, so I've loaded up a ride, and I'm headed out this morning.

So this guy has got this on CL real local. & wants 650 for all whichI think is a real good deal. Trouble is I just want/need the Brinley and he does NOT want to split the set up. My question is whats the plow worth & if I buy the whole set can I get some of my money back by selling the rest? Gonna go look at it next week if it's still there. We kind of pre agreed on 175 for just the plow if he's willing to split. If it makes any difference this was all on a 416. If I knew I could sell the rest at the BS I would let it go to members for dirt just to keep the plow Heres the CL write up FOR SALE: A group of 4 attachments for Wheelhorse classic style tractors(300,400,early 500 series) Will fit many earlier models as well. Includes a complete snowblower; a complete rear mount rototiller; a 42" rear discharge mower deck; and a 1 bottom brinley plow/sleeve hitch. All in very usable condition. Prefer to sell as an entire group. Calls only please. Asking $750 for all. Contact Chuck @ 920-293-4015. Thank you. (Sorry but I'm keeping the tractor! ) * PRICE REDUCED to $650 for all four pieces. And the pic

No worries Apples. .like I said not a big market for that stuff around here....green stuff ..that's a different matter... No worries Apples. .like I said not a big market for that stuff around here....green stuff ..that's a different matter... My bad tho... he doesn't want to split it up. Dang double posts.. my bad again

Haha. This '78 Briggs doesn't use or leak oil.

Back home from the Little Guys Show. It was a great visit with the family....some old and some new. Was great to finally meet you Zeek. And nice job on your yellow puller. Big To AC man Randy for the ice cream. That was a welcome treat today. The parade.

$250 sounds like a fair price to me. I would see if she would take $200 and your problem is solved.

Jim, I would grab that up in a heartbeat. The blower and tiller are worth that and I'll be looking for both soon. Looking for a blower in Florida you question? We'll be back home again in Indiana soon. Didn't Gomer sing something about that?

OK Jim...the blower is worth $250/300...the tiller is worth $350...the deck is about $150 if all is good...the Brinley is going for about $125 to 150. You need to make sure all the parts are there for those attachments. They look great in the pictures, but are all the bearings good?? Still a good price in my opinion...just looking at it all.

I won't start printed till next week Aldon. It will take about 10 hours actual print time so I will be working on them over the next few week's.

Glad to hear that Keith. I would suggest adjusting the shifter as I mention. That's likely what caused your issue. They do get loose after time.

Hope this works?

Here are some manuals that may be helpful.

Ok Jason ..now we are going have to see the belting arrangement on that!

And 4 more to score!?!?!

Very nice! Like the 'lectric PTO's too!

I got lucky and found a k91 for my RJ on CL . I just typed in kohler engine and searched all for sale . These engines come on all types of equipment so good luck . And as mentioned above the HF 2.5 hp is a easy fit and you can get it on sale for under $100 (maybe a mail order). You could do a reporwer for now without hacking things up . Then you could keep an eye out for that right engine to come along .

So how come ya never hear anybody say.... "got me a new pair of Jacobs today"?!?!?

That thing isn't big enough to hold all the BS that goes around in an election year!

Hello WHX61/3, Found RS years ago, but an unanticipated move by RS from one host to another zapped many user ID's and PW's, this was back around 2011 or so. Located some fresh batteries for the flashlight and found our way back! If you take a peek at this thread you will discover some interesting info I've been working on here at RS.

I tried mowing my hay field hilly rolling bumpy yard with my cab structure on my 520 year before last and it kept breaking uprights and banging my head on the bumps, so it came off before I totally ruined it and my brain, May have to look into a generic sunshade fabbed up to fit the horses, BTW beautiful place and 's,Jeff.

This model has an Eaton 700 transmission which is not meant for ground engaging attachments. Think I would limit traction by leaving the chains off to save the transmission. Garry

Might want to try Jake Kuhn for parts as well, he helped me out of a 5010 parts bind. . He's got the bearing, seals, bushings all in a nice little package. Even has gaskets too & might have gears that you need... doesn't hurt to ask.