Leaderboard

I'll let you take mine for a ride Brian

Just went out and got this one 20 mins down the road. Need some help with this one, I have no idea what it is. All I know is it's a

Had some seat time today, great to work my horse again! Love the 48" plow!!

You guys need to work on the Horses more and get more petroleum products on you. No kidding, where I have oil or something petroleum on my hands about up to my elbows several days a week it takes care of it and those areas heal 10 times faster. Hence Neosporin - 25% petroleum products... From my hands to elbows are no problem, the rest is. I tried something someone told me about a few years back for the extreme cold and it helps with dryness as well. After you get done with a shower take a damp washrag and knock off most of the water but not all, immediately cover yourself in lotion, it locks in the moisture. I would have never believed it would make you feel much warmer and help with dryness but it does, you will tell it as soon as you step out of the shower. I only do it when it get's really cold, Sandra does it every day all Winter. Can't hurt to try.

Geno, that back rest is an add on option...they are worth a little bit of money too. The belt guard would of been cut up because of the motor swap, if you wanted to put a correct looking guard on it you would probably have to modify one. Also, here's a couple pictures of my 63 so you know what original is...however yours has a couple differences like the steering wheel, and column by the shifter

Why did I just sit here and watch the full 2:21 of that?

Only once Mike??? Here hold my beer and watch this. John, I told you Iowa was a 7-5 team...everybody knows it. Save me a piece of Caesar's Pizza...actually save me 2 pieces...MaMa needs new soles on her shoes. Hope you are not playing NIU!! Pizza Pizza... :) :)

I looked, and the sideplate bolts are 3/4" so maybe they are hitting on a gear making it not turn over. Also, found a couple of the bearings were sticking up just a little bit, but not much. I don't think it is in the axle bushings as they are kind of worn around there. Will probably try another assemble tonight with shorter bolts....and no silicone. lol

I went after some parts for my GT14 a few days ago and came home with this pretty straight C165 8 speed minus engine. I have a S7D cast iron recoil start 7 hp Wisconsin that I have been looking for a tractor to use it on. I think I will put it on this C165 for now.

Once again , kudos to the staff ! LOOKS GREAT !

Round fender lawn ranger ..... Issues for sure

I plan on being there Geno.

Looks real nice. Planning on painting all of the shop tools? If so, someone has too much time on their hands! I see some shelving in the back ground that needs to be red!

sounds like a good project when do you think you'll have it done Glenn

Hey Mike, your planning on eating donuts with Jim aren't you? You got lucky last week especially after you said Wisconsin could stay home and not play, and win. This week you say that Nebraska can stay home. Here's hoping that pick comes back and bites you right in the _ _ _!!! As always, Go Hawkeyes!!!!

Im going to have to go with a b-80 mostly due to the fact the motor is not overkill and for me has all the power for mowing and plowing that i would need.

My vote is for the 1976/1977 B/C Series (B-80, B-100, C-120, C-160), 8-Speeds. I think they were the best looking, and overall toughest machines made.

As some as you may know. I had a little Medical issue a week and a half ago. With winter approaching I knew it would be a challenge to get tractors ready for winter. Craig (AMC Rules) offered to come over and give me a hand. And when he found out I was looking for an older tractor to plow snow at work he offered me his 1267 at a great price. He drove the 5 HOURS ONE WAY! today. I needed a plow for it and Brian (buckrancher) had one and after driving from CT. and back yesterday he brought it up this morning. Both the tractor and plow needed some love and good old fashioned thrashing to make everything work. We filled all the tires with RV antifreeze but 1 of Craig's tires he wanted filled going to need a tube so out the fluid came. Stevasaurus called in on Skype and brought Jim D. along. We had a mini M & G going with a ton of laughs. We even got the plow on the tractor!!! Wife made chili and brownies and we let Steve and Jim know what they were missing. I can't thank Craig and Brian enough for all the help and Steve and Jim for the back row heckling. Here are some pics. I even got Craig on Elvis! I called it Sqonk Fest instead of Squonk Fest because SOMEONE has trouble with the letter U!

I would have to go with the 78-79 "C" series. They were a mix of the earlier C's and set the foundation for modern tractor all the way up until the end of the run of Wheel Horse's, They were the what you would call the bread and butter or Back Bone for Wheel Horse.

Hands down... 1976 or 77 C-160 Auto. 2nd choice... Bronco 14 circa 1972 73

Whats your email address Geno? Never mind. Here it is. Radio_8-6911.pdf

Well, all I know is when you two get done kicking up dust in King Solomon's Temple you might want to stumble outta there and get your picks in. There's a Friday deadline this week don't forget.

This is something you really need to think about... I know you have a young family and I thought I heard you might be looking to buy a new house. If you should run into a pinch for cash it may be hard to even break even. I have thought long and hard about buying this tractor myself over the past few yrs. (believe it or not I could come up with the cash to buy it) but when I ask myself would I be able to sell it and at least break even if I had to... That is a tough call... I know if I got it I wouldn't be able to resist the temptation of lightin up a big fat cigar and firing that bad boy up and ridin it at the BIG SHOW, but then there goes the value.. Would you be able to resist the temptation of ridin it? I'm just trying to give you another angle to look at.. if you do get it I'll give you 100 bucks if I can take it for one lap around the infield....

Today I did some Horse tradin with Craig (AMCRules) I have always liked the 877 tractor's and I've had my eye on Craigs since the day I laid eyes on it. She's a keeper and will stay in its original condition. I went for a little ride on it today and when I tried to light my cigar my lighter wouldn't stay lit. I then remembered the factory cigar ligher, and it works! I bet Stevebo don't even have a working cigar lighter... Thanks Craig!

what was left of the hole was opened up to a larger hole and a patch welded in ground and blended then a new 5/8" hole was drilled Brian

that hole is where the valve stem is these are what I'm making the E-tank for

I'll make sure she sees this later, I'm still in the shop, she's playing with the turkey... Oh boy.

Take it easy on the new guy, he's fragile.

You gotta be kidding right?

jimT1971 has one of them only his is a custom ride with a 8 speed and the larger early sixties round hood fenders

Cool! Love those old Wisconsins! I have one on an old military generator that runs like a top. The magnetos on them are wicked!!

Should work fine for putting around. I set up a 1976 C-120 for my son (b-day gift) when he turned 9. It was a complete tractor minus the motor. Ended up with a Briggs 5hp yank start on it and it was great! He put many miles on it toolin around the yard and thru the woods on the trails. We never put an attachment on it, probably didn't have enough grunt for that. Mike.........

Geno is right in that your problem is highly unlikely to be the type gas. The problem with the ethanol fuel is apparently a cumulative effect with older fuel lines decaying and the build-up talked about in the carbs 'guts'. And - at least seems to me - some equipment doesnt seem to be affected as much as others - I have a 25 year old Yard Man rider and have never touched the fuel system and it runs like a top ... go figure.

They might pull off real easy... However the last four I did were tough, if the hub moves in the it's likely there's some wallow which can chew things up. My last one looked like this. I had to cut a new keyway The chewed up bit can really make it bind and it takes tons of force to pull them off :(

Just got through reading all the manuals I can find on it. Looks like it's a 64 34E Lawn Ranger and should have the hard to find Tecky H60 on it. If you find 2 Glenn let me know. A few questions for you guys. I don't see a backrest in the manual, and what is the other handle on the right for? Looks like the belt guard has been chopped also, I might have one unless it is different for that tractor than others. Also, does anyone else have one of these here with pics of it?

Thats a 64 lawn ranger...nice find. And those light kits can bring good money...the original kits are tough to find. That lift lever on the right side of the tractor is definitely not original, along with the rockshaft. Also, the original motor would of been a lauson...but I'd much rather have a kohler than one of those.

I did that before we talked Geno. It got everything clean but left a finish not as smooth as I thought it would. I am going to do another piece and use it as a test. I will prime it and then paint it to see how it turns out. Could be I am just complaining about nothing.

Gene, you better be safe and save it for me. I dont need you with junk. Lol first I thought lawn ranger. Glenn

520 drag races!

B80, as was mentioned. Perfect balance of power, size, weight,

Ha! I am sure this has already been mentioned..... Clinton had Kenny G, but we got Kenny B! Rob

Price is right was much better IMO however you seems to be learning from brother Jim on mastering the blockbuster... I still have a few items behind curtain number 3 .....

I have been thinking hard about what to name the 1267. It finally hit me yesterday. It's so obvious I can't believe it took so long. I had thought about "Steve" but then I'd have to plow with no socks on. So The 1267 is now " SQONK" in honor of the good time we had that day playing off of Steve's pronunciation of Squonk!

That first game is a tough one..... As much as I don't want to pick Iowa, I am looking at them, as my pick. They barley lost to a #16 team that had just 1 week prior, for lack of better words, totally destroyed Nebraska. Iowa had more rushing and passsing yards than Wisconsin.The thing that hurt them was the 1 turn-over..... Then we got the Wisconsin, Minnesota game. Let's see using Steve's analogy from a couple weeks ago it would go something **** this: Northewester beat Wisconsin, Wisconsin and Minesota both beat Nebraska. And Minnesota played Nebraska, in their stadium, right after the spanking Wisconsin gave them. One would have thought that Nebraska would have been more than up for that game. Sorry John, gotta do this one comment for the annology sake. Minnesota SMOKED Iowa, but Wisconsin, could barley get by them. SO>>>> Here goes: Iowa, Indiana, Northwestern, Ohio State, Maryland, Minnesota < If they do win, it will be the pick of the week on ESPN! Michigan St. If Minnesota pulls the upset, and they can, that means it will be Ohio St. vs. Minnesota and here is the kicker. Minnesota will not lose twice to the same team. Even though Ohio St. has home field advantage.

Might be a challenge to flip that one for profit.

If I strike a deal (selling) I set a time when they are coming. If they are going to be late they better call. If they are a no- show I move on to the next. I would've dream of selling something out from under someone after a deal is made just because they can get there faster or offer more money. If I'm buying I always call first to at least let the seller know I'm on my way

Thanks, I'm just getting to the stage of needing them! Plus enter SAVE10 and you get a discount . . . free shipping too

While we are on Black Hoods, here is another one of my beauties. This is a 1979 C-161 with fiberglass hood and plastic fender. The fender seems to be much stronger than the later version of the plastic fenders. I can tell you there is no iron oxide (rust) anywhere on this horse. As others have reported the hood is a great place to hold your tools or beer cans. The spots on the hood in the first picture are from two beer cans. The spots did wipe off.

I was just looking at the Commando 8 in the shed Thursday with my 10 year old grandson. He says it's not too bad, and that we should be able to fix it up the next time he comes to spend the night. Really! I guess these kids today know everything. Although, as slow as my leg is taking to heal, I just might have the Commando done before the leg.

I have always wanted a 4WD diesel and I finally splurged and got one. This one was used (2006) with 398 hours. Hope to add a loader soon. Thad