Leaderboard

well i was a trip to sweden to day and i went in to a liquor Store.. and geeeees i found TT's beer.. so i just had to buy a few boxes of it..

This is another load that was going to scrap. The man that I bought the load from inherited it from his brother who was pretty big on his Horses. He went to the big show every year and had several restored round hoods among other newer models. He had a pretty good parts stash too. To shorten up a long story the brother met a woman dropped everything and moved...to another country...So that left the guy that I bought this stuff from to clean out his brothers garage and put the tractors in storage. He is sorting out and selling some stuff and keeping a few tractors. Not being a Wheel Horse guy a lot of stuff was scrap to him,including this load of parts and the "all most" rolling 520 chassis. I plan to go back next weekend. I am trying to work a deal with him on 3 tractors,some early 60's Tecky's of Wheel Horse's and some other parts.

rusty, so where are the pics of all the scrap and junk? All I see is gold. Glenn

I pick up a nice 1054 Wheel Horse tractor today needs Little TLC but a lot potential and also picked up a wheel horse 702 in which probably going to sell. I been looking for a 1054 for awhile now a plan to restore this one next winter. The 702 seems like its all there but seems like someone was taking it apart.The deck is in decided shape. I also picked up a nice searsss15 with and bower and a mint deck. The John Deere 111 also came in the package most likely sell both of them to. To top of the whole buy today there were about dozen engines and parts I also got to.

This is one of the scrap yard bound tractors that I drug in the other day. Turns out,it runs and drives nice. The transmission feels great and the deck even seems quite. This would make a very good fix up and use or restoration candidate.

SHES ALIVE .. Had her running today for a short time before the newly painted muffler smoked me out. Gotta get her outside tomorrow for a test run and carb tune. New oil and filter, decarbed combustion chamber , valves cleaned and set, new plugs, new oil drain pipe, new gasket under oil filter base, ,cleaned carb, and removed around on gallon of gunk from tins and cooling fins. Still needs some wiring clean up including a new switch and steering tightening. Might try to look under the brown rusty hub caps to see if there is any chrome left.

Great save! I have a 1054 coming home this weekend, very excited! Mike.......

I'm going nuts here... Bought a wheelhorse, still have to pick it up. But like a dummy, I didn't take a pic, and forgot to write the numbers down. Looked up every model of wheelhorse on google images to find it, and can't get a match. Here's what I do know. 11hp briggs vertical, wheelhorse 1in axle rear end, approx 32-36 in rear discharge, 8in rear rims. Steel hood. Don't think it's a stamped frame. Looks 70's, early 80's to me. Pretty small, but not as small as a Ranger. Here's the problem. B111 seems to be close, but mine has no foot boards, and NOT a peerless transmission. Shifter is on the floor, not under seat between fenders. I promise to get pics Saturday when I pick it up, and write down the numbers. Until then, anyone have a clue what this tractor is? Thanks, Dennis

hey guys, as you know i work for a wheelhorse dealership. i recently transfered to another one of our stores, and in doing so found a huge shelf in the upstairs portion of this place that houses a ton of used wheelhorse parts. i want to get this stuff sold to make room for other things here at this dealership. just curious to see what everyone was interested in seeing me throw up in the classifieds section. or rather what parts are popular among all of you that i can sell on here. im sorry in advance if this post is in the wrong place. i wasnt sure of where to put it all. pm me or let me know here what you guys wanna see sold in the classifieds section. oh yeah i forgot to mention, there is no part numbers on anything so bear with me on this stuff

great haul whats the model of that green briggs motor brian

Yea it was a picture By me. Don't get me wrong paint is pretty faded. Sent from my LG-D800 using Tapatalk Meant bad picture By me Sent from my LG-D800 using Tapatalk

Great haul! The 1054 looks kinda purple....is that just the way the picture came out? Mike...........

like i said, we will see how it works out. i used permatex ultra black. i have a hard time removing any of this stuff when i don't want it somewhere, so i will see how well it sticks to the lining and the band. i have reserves of the lining if need be......

man, the 1054s are coming out from everywhere........

Thank you, and no I don't mind. After paying for fuel round trip to pick it up, I had $600 total into this Case with all of the attachments. I got a great deal on this machine! If this had been up north it would have brought much more, but there are very few garden tractor collectors down here in my part of the world. Thanks Thanks chazm! It is a big garden tractor, and I'm really liking it! I finally got around to getting the Brinly plow that came with this 444 back in working order today. It was very rusty when I got it, as it had been sitting in the same place so long, that it was actually under the ground, with only parts of it above the surface! I knew it was going to have rust pits, but after removing it from my E-Tank the rust pits had become rust canyons! Thats ok, as its for work, not show. I did give it a coat of paint to prevent further rusting, and it got all new adjustment hardware, and coulter wheel from Brinly. It seems to work very well, but I still need to do some adjusting on it. Here are a couple pics. Thanks Matt

Re the tag I'm no expert and I'm sure others will chip in if I'm wrong but heres some observations regarding the 1977, 1978 and 1979 models of the D-200. The word 'model' refers more to design than factually indicating year of manufacture and like the auto industry models were introduced earlier than Jan 01. The 1977 model (I have one) was the last with the red & white WH decals and things started to change with the 1978 model. Keeping it simple the rear rims that could be put on either way round for wide or narrow track were replaced by wider rims that only fitted one way. A band brake was added to the tranny, and decals changed in a kind of odd way. Initially the 1978 model was given a mix'n match set of decals some from the Red & White style, some from the new silver on black for controls, and an interim newish style D-200 for the sides of the instrument dash. Example in a thread here: I have a second D-200 that is a slightly later 1978 model but it has the full set of later style decals. Both my 1978 D-200 and the one in the above thread share the same parts suffix of 01 despite the differences. There never was an 02 variant for that years model. Technically yours is a '79 spec model that apparently went into production earlier in the preceding year than would normally be the case so perhaps they decided to hurry on from the confusion Andy

That's It! After hearing that I Quit Drinking! :help:

Now thats what I call a BIG BOY TOY.... Nice job Matt ...

Looks Like Your on yer way. Make sure your tightening sequence and Torque's are Correct. ~Duke

That is a beautiful tractor. Mind if I asked you how much you paid for it (pre restoration)? I have no idea what the pricing is like in the Case world.

I would love one of those tractors one day.

I have to make a repair to my line set very soon. It has started to bleed out of the brazed joint where the line meets the manifold under the seat....I really don't want to take this all apart to silver braze it but I guess I have no choice as Im tired of it marking its spot like an old Harley.

Nice find!!!

That commercial should come with a public health warning!!! I feel like I should listen to some Metallica to restore the balance

She must be a MIGHTY fine Woman.

WOW , WOW & WOW ! B E A U T I F U L !

Good job of saving all this stuff. After seeing the muffler and rain cap, my question is: Do you have a lot of horizontal rain?

Nice save! Looks like a lot of useful goodies there.

Yeah that would be a real shame to send that to the Scrap bloke , I always wanted a 1054 yn my collection

One heck of a haul! Hard to believe people junk stuff like this all the time. Better get back there soon to scarf the rest of it! LOL!

I only ever knew of one size, 6.40-15 as has been stated. B.F. Goodrich Silvertown power grip was used as the lug tread. Not sure what the turf tread tire was. Mark.

Leave in Barn for 50 years! ~Duke

Yeah, so good, they even made a commercial about it. http://www.youtube.com/watch?v=GUhmaTXlUDg

This thread is one of the longest on Red Square because this winter has been one of the longest in memory and it's not over yet! We will have to post a few more of the action shots before this week is over!

Gene, I have remembered. He is 2nd in line on the tractor.

Here are a few more pics of assembly. Since I was going for that Big Tractor look, I had to put an exhaust stack on it as well. Just for a size comparison, I took a couple pics of the 444 next to my C-160. Matt

The next order of business was the paint, and body work. This is the part I dislike the most, but it can be very rewarding when done. The hood, and fenders were the only parts that I stripped down to the bare metal, as I really wanted them to turn out nice, and smooth. The chassis, and wheels got a couple coats of Case Power Red, which I mixed myself using IH Orange, and IH Red, the color I use on my Horses. The Desert Sunset color for the hood, and fenders I had mixed at my local paint supply, as I didn't have the necessary colors for mixing that. I used hardener in the paint for added durability, and shine. I then picked up a set of decals to finish it off. Thanks Matt

I am a lineman for the county And I drive the main road Searchin' in the sun for another overload I hear you singin' in the wire I can hear you through the whine And the Wichita Basketball Team is now off the line I know I need a small vacation But it don't look like rain And if it snows that stretch Down South won't ever stand the strain And I need you more than want you And I want you for all time And the Wichita Basketball Team is now off the line And I need you more than want you And I want you for all time And the Wichita Basketball Team is now off the line ~Duke

Another vote for a quality rebuild. It will run for another 40 years.

And some other ones sitting in the yard. 800, 520h, and a100.

After some pressure washing.

ekennell, You wont be sorry for ordering from TJ. I purchased a complete engine rebuild kit from him 2 years ago on my 520 SNOW CHUCKER and everything came out perfect. His prices are right inline and he is great on delivery. Good Luck ~Duke

Well, that certainly is the common description of a fuel problem - will run on spray and wont without. Since you did work on the fuel system just prior, then retrace your steps, something must have changed.

worked on the clutch idler arm assembly tonight. there was way too much play in the shaft where it passed through the frame, the holes in the frame were worn oval shaped...i hadn't dealt with it before powder coating the frame so it needed to be taken care of. i purchased 2 7879 bushings on ebay for $15 free ship last week and tonight after work went to the surplus store near there and looked through all the reamers he had there. usually i can pick up something to do the job for under $5. half an hour and $3 later i had a reamer to take with me.... reamer size is .5747". because there is a very slight taper, i could stay around .569 (od of the bushing) if i didn't go all the way in. because i don't have a taper chuck i just used the reamer by hand. wasn't much material to take out of there so it was fairly easy. about half way there.... the last of it i used vise grips to save my hands a little... after going in a little at a time and testing the fit, i arrived at a point where it was just a slight effort to push the bushing in. test fit of the bushing. the bushing was installed from behind as it has a flange and wouldn't have gone into the area of the frame its needed because of the larger hole in the frame interfering with it. both bushings are going to be loctited in their new home. then i repeated it again on the other side as both holes were worn. test fitted idler arm shaft through bushings inside frame showing flange of bushing.... shaft installed teaser.....

The Cubs aren't playing this year?

That is very cool Bob, you did good.

Wow, what a great day Duke! Looks like you all had a great time.

Nice little collectible there, having him sign the magazine article too. Looks like everyone had a great time...you're a good ambassador Duke.

Well congrats Duke, looks like and sounds like you had a wonderful time. Looks like you made a great ambassador for are hobby and Red Square.

Wow What an honour that must have been Bob You and the family looked like you have a fantastic time with this Guy And such great pics Any of those pics are calender worthy Congratulations Bob Just had a thought perhaps you could get this guy to be a member here at RedSquare That would be awesome