Leaderboard

Stevebo gave me a call that his cousin Toddbo was looking to sell his Commando 8. I really didn't know where this tractor would fit in with my collection but after thinking about it over night I decided to grab it. Besides it was only a two mile trip to Toddbo's place to pick it up! I decided to part ways with my 657 wood hauler. The Commando 8 has factory lights and a charging system with a battery, something the 657 lacked. Though the factory lights aren't the brightest they'll do when I need to clear snow at night with it. No need to light up the neighbor hood, just a few feet in front of me will do the trick. I'm only going to throw a new seat at it and call it done.

After a few months of tinkering I was finally able to hitch up my rebuilt tiller to my trusty 310-8 today, worked great! Special thanks to Kelly for the dial-a-height and Dennist for the hitch, pulley, and input shaft. Tillers seem to be a bit rare in Missouri so I had to convert a RT-366 to work with the newer style tractor (hence the hitch, and input shaft). Can't believe how well these tillers work! Now that everything is in working order it will get tore down once more for a fresh coat of paint!

Yikes!! That's not what I was thinking you were doing at all!

Pull off the air filter so you can see Carb Throat. Have a can of carb cleaner or (gas in squirt can ready). Then start up engine run it till it starts to die then squirt carb cleaner or gas in the carb throat, If it try's to run then it is most likely lack of fuel ie: (Fuel System Problem). If it dies right out then it is most likely (Electrical Problem). Doing it this way is your cheapest systematic start, as your not just replacing parts. You will also know which direction to go, then follow every ones trouble shooting suggestions that are mentioned. ~Duke

I just bought this tractor earlier this week. It was said to have a bad motor , major leaking, and needed a rebuild. The deck was just rebuilt 2 years ago with all new spindles , paint, blades , and reinforced. I have since fixed the leaking and have her runnin really well for the most part. Just a little miss when revving up to different RPMS. I got the engine back in today and presher washed the tractor. All gauges work and the hydro seams strong as well. Im looking forward to using this beast. It was garage kept all its life except for this winter because the PO bought a zero turn and had no room in the garage. I am glad he sold it , instead of leaving it rust away. Its safe to say I got an awsome deal considering the shape shes in and the engine now runs. What do you guys think... Sent from my Event using Tapatalk

well as we all know the winter has been long and cold, so buying stuff has been limited for me, but now with the weather warming a little (it was 23 deg today) and snow melting, I'm getting calls from people wanting to sell stuff, this is a deal I picked up today, nothing great but still a good deal. Tractor needs a head gasket that is why the PO stopped using it, it has been spray bombed but don't look to bad from 5 feet, deck has been patched, but works. I havent ran the numbers yet but I know it's a 76 or 77 B-80 8 speed with 36" deck. This was the bonus part getting a box of goodies, blades, chains, PTO parts, deck parts, and more, a very nice homemade set of weights about 75lbs each, extra set of ag tires, weathered but good tread, the orig. rear tires and wheels and a mid grader, that we found digging stuff out of the barn. All in all a good deal, even though it was COLD and windy out.

C-125 brought some logs from my wood store today.

I'm not sure I would touch any of the things you mentioned unless you are having a problem. I'd have a good look at everything while it is apart, and do a thorough cleaning of the cooling fins, but that's about it. I would fit new valve stem seals on the inlets while putting it back together. Not sure what you mean by the gasket on the oil cooler? Do you mean the filter? If its not leaking now, and the bolts are tight, I would leave it alone. The 2 piece intake manifolds can leak, but if your engine is running well then I probably wouldn't screw with it. Martin has described how he did his in one of his threads. I've never had to buy a carb kit for an Onan. I have always managed to remove the top, clean out the bowl and blow through the jets without destroying any of the gaskets. Mind you I have never had a major carb problem either, if your motor is running OK now, I wouldn't get too carried away.

Nice plows, both of 'em! I used a plow with my slot / sleeve hitch years ago. Worked like a charm!

Heck, I'd be happy with" What are you using to clean the yard" thread

So I got home tonight and fired up the 520 to run it some..... and maybe just to play a little I only ran it for a few minutes yesterday because of my nieces Birthday party. Today it ran much better. No more miss at all. It was missing and would puff a little ploom of smoke when it would hiccup. It must of been the old gas. I drained the fuel and put non ethanol gas in it yesterday. It must have worked its way through. Now shes purrs. The planets must have lined up in a row today. My girlfriend said can I drive..... "me" ofcoarse you can.... "her" I dont like this leaver to make it go, I want a gas pedal. Do they make a tractor like that? ..... "me" Well its funny you say that .... There is a kit you can buy just for that, its only $200. lol Its really hard not to get some seat time on it but I must be patient I guess and pull the heads and adjust the valves. Thanks again guys. Great group here. I am a member of other forums and it can get pretty high school. Kyle

Yikes !! is right. Here is how I hooked up a slot hitch on my 12 /8 spd. I bought 2 5/16" yoke ends from TSC. Then I went to Lowes and bought some cable, crimp ends and cut loose and bought the crimp tool. I crimped on an end ran it through the rear yoke and then through the tube. Slid on the front yoke figured out how long it had to be and crimped that one. Secured the yokes to the hitch and lift with clevis pins and clips.

Here are a few more pics of assembly. Since I was going for that Big Tractor look, I had to put an exhaust stack on it as well. Just for a size comparison, I took a couple pics of the 444 next to my C-160. Matt

Im still watering my garden

Live by the 3...die by the 3.

One more for Regal Red. I found that it took a little while to harden up for me. Wish I had been a little more patient. Don't look too close.

the 875 is a great little tractor. i picked one up a couple years ago. it now belongs to my son, Kent. we spent some time doing a full rebuild on it just recently..... heres how it looks now..... heres the thread on it and a little about when i first picked it up...... got any pics for us?

If there is a guy out there that will put a front blade on his Senior when it snows for a little fun, its the Duke.....

Sorry, too far from the show to make it. Here is a picture of just one shelf of "stuff" the other side of the shed has a larger shelf that is also filled up. I also have shelves full of parts and engines in my shop.

I'm not much of an expert on the pond and wheel horse walkbehind's, but i saw a picture of a pond walkbehind with a plow similar to mine. Has anyone seen a plow like this or does anyone know anything about it like what model it's for or what year it is? Maybe I'm completely wrong with this too. lol

Thats what happens when you go several days without posting any new pics Martin! While my stuff isn't nearly as high quality as your stuff is, it gets me threw the hard times. These do seem to be really well built machines, and about the only thing I would change if I could, would be to build a hydraulically controlled foot pedal so I didn't have to control the forward/reverse with my hands. Matt

Thanks Denny! I didn't have any experience with Case until recently when I was given a 222 by a good friend. I was very impressed with that machine, and I really enjoy using it, so when this 444 turned up a couple hours from my house, I jumped on it. My dad owned a small dealership when I was a kid, which is why I'm so partial to my Horses, but one of my dads close friend ran the local Case Power And Equipment, so I spent some time drooling over these as well, when I was a kid. Thanks Thanks for the kind words. This hydraulic tiller works very well, although it makes the tractor very light in the front end, but I'll be dealing with that very soon. Thanks Matt

looks like somebody is creating tractor porn all by themselves? Matt, that 444 refurbish turned out real nice. definitely a real capable tractor. the colors of the case tractors and their design has always gotten my interest. maybe down the road i will find one in my shop, who knows........

The next order of business was the paint, and body work. This is the part I dislike the most, but it can be very rewarding when done. The hood, and fenders were the only parts that I stripped down to the bare metal, as I really wanted them to turn out nice, and smooth. The chassis, and wheels got a couple coats of Case Power Red, which I mixed myself using IH Orange, and IH Red, the color I use on my Horses. The Desert Sunset color for the hood, and fenders I had mixed at my local paint supply, as I didn't have the necessary colors for mixing that. I used hardener in the paint for added durability, and shine. I then picked up a set of decals to finish it off. Thanks Matt

I like the attachments that came with it.those are powerful tractors

Duke has the right idea

I am having trouble posting pics but here is the story of how I got the 875. In 1970 my parents moved out to a semi-rural area and our new neighbor had a Wheel Horse tractor that he used too mow and plow snow and I thought it was the coolest thing. He passed away and the family that moved in got the tractor with the house. The daughter got married and took the tractor with her when she left. Last week I was talking to the son, who still lives there, and he was telling me his sister was moving out of state and she was leaving everything behind and he had to get it out before the new owner took over and he mentioned she still had the Wheel Horse and he was going to scrap it with all the other stuff she left. I told him I would help load stuff up if I could have the tractor and that was fine by him, so for a sore back and a tank of gas I have the tractor I first saw when I was 12 years old.

Good deal. What brand / model multimeter was at fault? Before you swap the RR, run a wire directly from the RR case to the battery negative terminal. Corrosion under the current RR and between old body panels will cause a good RR to overcharge.

I feel some upsets coming on today and can we say pepto bismol for my upset brackets/glad I played college football

search for the duro ag tires for the rear..... i bought these for my son Kents 875. they are duro 23 x 10.50-12 will fit nice on the standard 12 x 7 rims.

Any way you look at it , for a small town that is devastating. Without any injury or deaths in those upper floors I think everyone was very fortunate.

You may be able to find someone with a lathe or mill to cut it out cheaper than buying the cutters.

My main question was by the pics posted I didn't see much. I wasn't implying there was a small response. The fire here was in a village offed than 1000 people And the buildings were surrounded. We had company's here from almost 40 miles away. I didn't Mean to offend anyone. It just looked stange from what I saw a week ago.

Squonk; 15 departments responded. Two were shuttling water and one big pumper pulled water from the river. The main st. there is very narrow two lanes. Rumor has it there was a co. doing hot tar on the roof. I wouldnt want to be that outfit! I know it sounds like I am defending them but many of my friends are fireman and the TV pictures really dont show the entire effort. Sent from my SCH-S720C using Tapatalk 2

Did some one drill and pin the coupler or put a set screw in it because of worn splines I have seen this on few machines that I worked on -did not notic this until I remove dirt and paint

That is really tragic tp lose a building of that age . even more tragic to lose another dealership . Thanx for the pics Jim

Picture of mine and its different then yours. Then there is the other one, just post here that was for sale out east and its different than either of these. Cant hardly believe there were that many different one for the walkers

I have the same tractor in excellent shape with only 280 hours on the clock. She runs really strong. I recently took off all the "extra" sliding hardware under the seat and installed a new lower seat on just the "c" springs and the ride is much better with a lower center of gravity. Now you just need to change your avitar....

I never was good at the "stick and ball" sports, but do enjoy watching the non pro finals for the sportsmanship and claim of accomplishment, Give me something mechanical to work on or compete with and I usually do OK, or just send me out in mother nature to enjoy and relax. The walleye capital of the world is in my backyard but the good fishing is in Alaska.

Rustoleum Regal Red on mine too. Its not a bad paint but it does not compare to Automotive. I have not had a drying problem, but I find it will chip easy enough if not careful. I use spray cans and quarts shot on with a gun for the bigger pieces.

REGAL RED

Very nice find!! I would love to own an 8000, but they are very difficult to find. I look forward to seeing you get it fixed up. Here is a pic of the 3000 I gave to my son. Thanks Matt

No on the desulfator. The plug wire is new and it is an oem Kohler specifically for Kohler small engine's. Would it be worth trying an automotive grade plug wire? Wouldn't running it for an hour or so at this high volage ruin the battery?

The 96 first. The first thing you need to figure out is if its fuel or electrical. When it dies and wont start, pull a plug wire off and check for spark. More to follow when that question is answered. The 91, you need to check the solenoids. The frame mounted one is the most common culprit. With the key in the start position make sure you are getting 12v to the trigger wire( small wire) . Make sure there is 12v on the large wire coming from the battery. If you have 12v on both wires, make sure you have 12v on the other large wire. If that proves good move to the starter. You need to have 12v at the large wire and 12v on the trigger wire with key in the start position.

I agree... I have had nothing but issue with that Majic paints... I even say in one of my vids not to eve use that ^*^*&^^% stuff!

The above for me comes after changing oils and servicing hydros. Also add in there a smiley face with a string trimmer and a smiley face on a Mahindra 4025 with a 6' Bush Hog.

this is what I'm using!

My rig. New cab for this year. 1977 C-160 auto with hyd lift.

Not quite "got duels", more like "had duels" since changed for larger single tires. Handy for extra traction when taking off