Leaderboard

Here is a project that I am working on. I know that it is not a Wheel Horse, but I thought that it was just too cool to get thrown away. It is a Craftsman FF20 that was made around 1983 and was supposed to compete with the John Deere 400. It has a 20 hp Onan engine, an Eaton 1100 hydrostatic transmission, and a two-speed Peerless rear end. The rear tires are 26x12x12 and the front tires are 18x8.5x8. Here are some begining photos: Here are some photos of where I am at so far: I am trying to find two of the parts that were missing when I started. They include the plastic side cover for the engine and the perforated steel grill. I am hoping that someone on here either has one that they would be willing to part with these pieces or know of someone that would. Please send me a message if you can help. Thanks, Dennis from Minnesota

My father passed away on Oct 30th 2012 after a long battle with kidney and heart disease he was 81,dad was the first to collect the Wheel Horse tractors and passed it on to my wife and I and our two sons to this wonderful hobby.Dad and my mom really enjoyed driving around at the shows looking for treasures and sharing time with our friends and family. As you can see from the photo that they really enjoyed themselves,dad's tractor is now in my collection and will be at every show that we attend in memory of him,he will be truly missed...

It's a 308-8, smokes a little when you start it but clears up very quickly. Only used on the tiller for the last ten years.

Like a good neighbor...state farm is there. Congratulations on another milestone Jake.

Bet the wife wont ask me to help decorate the tree again!!! But after it was all done she kinda likes it. I wanted to hang some parts on it too, but that was out of the question.

Good job Craig. I'm right behind you too.... -BK

Well done Craig, it's always "interesting" to read your posts. Keep up the good work.

Go Browns!!!!!!! Maybe Next year we could be a contender...cause I never heard that before!!!!

Yesterday was a GREAT DAY... :happy-jumpeveryone: :happy-jumpeveryone:

OK...you guys win...I've decided to keep both them...I'm going to use the B-80 as a dedicated mower/trailer puller and use the C-100 as my plow machine...Here's the "family" picture.. The B-80 is a 74...The C-100 is a 75

Holy Cow...what is it with you guys?? I've got a great idea...next year we will pick the games of the Pac-10 conference. :ROTF:

My one and only Wheel Horse was purchased new in 1978 by my father. He had just retired and treated himself to a brand new D-200 w/mower deck, belly grader blade and 48" snow thrower. What a beast. I got it in 2009 when my brother, who inherited the old homestead, didn't want it (he had just purchased a JD 2305 for his property). I took the old D and revamped it and got it running. It's my main defense against heavy snows (the snow thrower works great) in the winter. My main interest in old small tractors stems from a 1952 Tiger 883 that dad bought in 1956. I now have that one, and a second Tiger 883. Both are in good shape and both run fine. They're just a little difficult to actually 'use' around the house. They're hard to drive, no brakes, etc. They're for show only. My regular lawn maintance tractor is a 2006 JD 155C. It mows, hauls and snow plows (up to about 6 or 8" deep). But the old D is the beast of the group. When digging into deep snow it draws a crowd in the neighborhood. The kids like to run through the 'rooster tail' of thrown snow and the adults just stand there, with their coffee or beer, and appreciate that I'm clearing their drive for them. It's a hoot! Merry Christmas everyone! KT

My wife is a goldsmith so she made this one for my brothers birthday.. can be used as a keychain or pendant it is not cast .. it is sawed from a thick silver plate, so this is really handwork it's only made ​​two of them as it is relatively expensive to make them

Well after experiencing the devastation of hurricane Sandy first hand, many of the people around me including myself were left without power, heat, phone, or internet for over a week. As well as food, gas shortages, and looting problems. However I was much more fortunate than others in my area, we had no downed trees probably because I spent a week during the summer on a JLG man lift cutting and trimming the big oak trees that surround my house. I shared a Generac 7000w generator with my Aunt and Uncle as they live next door and we ran both houses on it. As the days progressed with a gas and generator shortage people around us began stealing. Three generators were stolen a half mile up the street from me. Our was chained to posts in our pole barn, as well as put in a locked shed with a front end loader parked in front of it. A generator up the street from me was chained to a tree, and later stolen when someone cut down the tree to steal the generator. So I decided it was time to take action and begin prepping for whatever other power outage is to come my way. So I decided it was time to get a nice generator that could power my whole house as well being efficient, reliable and the ability to use multiple fuels. So I bought 2 nice kohler generators. A Kohler 7.5C62 that translates to a 7500w 4 cylinder 1800 rpm generator that has an air compressor and heater on it that is made to run 24/7. Shes in a nice steel tube frame and 6 feet long and 2.5 feet wide. We used a 2 ton hoist to get it into the bed of my truck. The pictures are not the best because I picked it up in Virginia on the way home from North Carolina where I spent Thanksgiving. It is set up for gas at the moment but if I buy a regulator and take a plug out of the carb I can run it on natural gas and propane. A so called portable 5000w Kohler Power Pro generator with a K301 engine it is heavy! Yes it is only pull start but starts first pull, and is not that bad to pull. So the damage? Only $650 for two awesome generators. Try buying one new portable for that! Pics: 7.5C62: Kohler Power Pro 5000w

Like a good Neighbor...with 48 horses, and a barn...with stacking...and 2K posts. Congratulations mate :) :happy-jumpeveryone:

Like I said to Stevasaurus, so much :teasing-blah: :teasing-blah: but I like :teasing-blah:

Congrads Jake. -BK

Another nice tractor you picked up Chester

:woohoo: way to go Jake :happy-jumpeveryone:

:scared-eek: 5000!!!!! Congrats! :banana-tux:

Congrats craig! :thanks:

Very nice, tiller came with it too?

:happy-jumpeveryone: :bow-blue:

Congrats Craig, You have helped me out a lot!! Thanks my friend. Jim krazy_horse

:woohoo: :greetings-clappingyellow:

Great job Craig, I'm sure there will be more topics about how great you are. :dance:

LUV it Rich!!!!!!!

Wow the Browns actually beat the Squeelers... And the Buckeye's beat that damn team from AA.... A proud day indeed for Ohio!!!!!!!!!!!!

Use the German torque setting built into your arm.... Gootentite! :)

I just replaced my terribly worn seat, 416-8. Tractor Supply has a steel pan seat, high back, mounting holes match. Was $74.00 including PA State Tax. I like the seat but, doesn't have drain holes. Watch the weather. I have picked up seats at the junk yard. Found a few good ones in the past, $5. http://www.tractorsupply.com/high-back-steel-pan-lawn-tractor-seat-0278051

Be prepared.... there looks to be somemore room in there... you'll fill it with another WH!

I'd buy a new seat cover, just be sure to take the seat pan with you when you pick one out so you get the right one, they make a bunch that are close.

I am going to make a video on how to time coils and the camshaft to the crank... Easy to do once you do a few... sounds like improper ignition timing or possibly improper valve timing had and 8hp do the same... ( Improper Ignition timing and cam timing was off 1 tooth) fixed that is started right up...

Yup. Don't try it in your wife's oven. :angry-cussingblack:

OK drumroll please.............................. Is that Wheel Horse the rare and elusive "Swayback" edition?????

Update.... that large white cloth like object you saw going flying by was a Towel... thats right, I surrender, give up, roll over, all of the above. I am out of my comfort zone screwing with the timing/coil on a Tecumseh. Some may think that makes me a coward... thats fine too. Between all of the headache pills, coffee, time and parts I am done.... It has been dropped off at a dealer friend and i will update with what he comes up with as the ultimate solution. Meanwhile I am going to go out and hug one of my Kohlers and salute one of my Briggs both of which never fail to start and get the job done. Tony

The Bears again show that they have what it takes. Why do I think that??? because today the Vikings got their rear axels handed to them!!! DA BEARS is it!!

Oh that's just great, they screwed up and beat the Seelers. Oh wait, that's a good thing! :dance:

Let me know if you need anything but this should get you going. The bottom bend is not at 90 deg but more like 75 deg

Thanks Guys- and yes stevebo- he is don in the basement right now power lifting- chanting "next year" Al

I'd offer $100 and see where it gets you. It's definitely worth more in pieces than it is whole, but that's not how a species is preserved. :disgust:

4000 POSTS!!!! iT'S ALWAYS A PLEASURE SEEING WHAT YOU'VE POSTED NEXT STEVE. LOVE THE VIDEO HELP TOPICS! KEEP EM COMING BUDDY!! :thumbs:

. . .............12-0 BUCKEYES ..........DEFEAT MICHIGAN!! . . . .

I realize that this is the Big Ten thread, and it has come down to the day of THE GAME in the Big Ten, but, it has occurred to me that there are fans of other conferences enjoying this thread too. And I realize too that we have been kinda rude in not giving them their due. So here's a little something special for our friends to the South in the S.E.C. ~~~~ :thumbs:

Tom, it would have been alot less work for you to have reset the point gap to see if the noise would lessen. Most troubleshooting is performed easier using the old divide and conquer method. Resetting the point gap may have not sounded like the way to begin, but doing this retards the ignition timing, which takes alot of stress off extra clearances in the rod, crank, piston, and wristpin during rotation. Less stress equals less noise. So if you retard the timing and the noise lessens or goes away, then you know the problem is in the crank, rod, piston, wrist pin area without disassembling the engine. It may then be in the balance gears, but you will then know where it is not. This is a community, and I'm not trying to sound like a Kohler engine Guru ( I am certainly not that ). I'm just trying to help you and the other members here learn some of the skills I have aquired along the way in an effort to take alot of unnecessary work out of what we do in our spare time here. Another thing I have learned is less unnecessary work equals more time for necessary fun Van

I like the narrow ags on it too.

:WRS: AMC rules, 16HP Thumper, #1 Wheelho or what ever else you go by, just don't change your avitar or we will never know who you are. :ychain:

Hey Charles. you just remember who gave you your Nic-names! Lol! Not only are you known as "Flipper", I have also given you the title of the "Locator". If you can't locate it, it ain't out there! Many of us here have benefited from tractors you have Located and Flipped, and always at very reasonable prices or barters. You can name your biz. L&F Services! "(Locate and Flip) Hey, not many guys have their own theme song! On another note, though CT is chock full of Wheel Horse's It was a very rare sight to actually see one back when I was growing up in the 70's and 80's. I started out playing with tractors at a very young age. There was an old round hood that an old guy used in the neighborhood that I would see using every once in a while. I loved getting the chance to see him pushing snow with that little tractor, If I had to guess I think it may have been a 552. I grew up on a private road and by the time I was about 10 we had a new neighbor at the very end of the road, he was a Major League Baseball player by the name of Joe Lahoud. Joe and his brother Mike were real cool dudes! The first winter they were living here they would clear the long private road with a C-160. It was a very bad winter, lots of snow. I was always out there watching Joe or Mike push snow. That only lasted a yr. because the next winter they were using a couple of souped up Dodge 4x4's.! Well, one was an early 70's Power Wagon and the other a mid 70's Snow Commander, All I knew at the time is they were real nice trucks, both had 4-speeds and they sounded wicked. By the time I was 13 or so I helped one of my friends in the neighborhood cut lawns with his Dads mint B-80. Man, what a nice tractor that was! I have had and restored MANY different brands of tractors thru the yrs. You can't beat the quality of the Wheel Horse and parts availability. I was a big part of the local Cub Cadet group of guys about 8 yrs ago or so, we were a very active group but, just like that, it all faded away and I sold all of my restored Cubs. I guess I was always a Wheel Horse guy since way back in the day, now it has been finalized. The best tractors and people are right here.

Finally managed to get a bit more done on the Horse. I have manufactured a new deck stand centre section to replace the badly corroded one. New seals were fit in the transmition and everything bottomed, primed and given a nice coat of shiny red paint. A few items have been replaced on the chassis ready for the deck stand to be painted and mounted. So a little progress has been made. On another note I went with my friend yesterday to pick up another WH for him, it has a number of attachments to go with it, these being a rototiller, two cutting decks, a snow plough and a single furrow plough, all WH items. Some of them may be for sale if they are of interest. Cheers for now, MartinH

The way I bought it The way it sits now - Seat and engine from a 1077