9 files
-
Free
GT-14 Dash Plate
By Wheel Horse 3D
Dash Plate for GT-14
Fits on a 12" buildplate.
Manage to get some nice ones of these printed in PLA but the PLA warped almost immediately in the sun.
PETG should be a good option. You can print with a filament change for colored text, or print all in one color and paint the text.
I just had issues with my printer giving good clean results with PETG.
5 downloads
(0 reviews)0 comments
Updated
-
Free
Wheelhorse logo vector file(2D)
By Wheel Horse 3D
A 2D vector file (SVG) of the Wheel Horse logo. Very handy for developing your WH themed 3D models!
4 downloads
(0 reviews)0 comments
Updated
-
Free
Headlight frame for 78' 79' fiberglass hoods
By Wheel Horse 3D
Front and back frames for use with 1/8 inch plexiglass.
0 downloads
(0 reviews)0 comments
Updated
-
Free
3D printable hedlight lens relacement for #7075 lens
By Wheel Horse 3D
Direct replacement for #7075 lens.
Front bezel and backplate to be used with 1/8 inch plexiglass. Front bezel is of the flat regular design. Can be printed in multi colors with a single filament change.
2 downloads
(0 reviews)0 comments
Updated
-
Free
2-1/2 and 1.6 inch steering wheel inserts
By Wheel Horse 3D
Can be printed in multi colors with a single filament change.
0 downloads
(0 reviews)0 comments
Updated
-
Free
Ornament Standard hood #5438
By Wheel Horse 3D
Regular 3d printable hood ornament.
1965-1975 part number 5438
This model is about 0.2 inch larger than original in all dimensions, but has same 3 in hole spacing.
1 download
(0 reviews)0 comments
Updated
-
Free
GT-14 Tunnel Cover plate
By Wheel Horse 3D
Again advise PETG or ABS, PLA will likely warp in sun
6 downloads
(0 reviews)0 comments
Updated
-
Free
D series Dash plate
By Wheel Horse 3D
two halves L and Right with a couple extra screw holes.
A custom stepped bezel that goes under the dash light and between the 2 halves.
Advise PETG or ABS, PLA will most definately warp in the sun.
0 downloads
(0 reviews)0 comments
Updated
-
Free
Bottom spacer for regular #5438 hood ornament
By Wheel Horse 3D
Bottom Spacer for the Regular 3d printable #5438 hood ornament.
.You may have to adjust the width a little depending on your individual printer.
0 downloads
(0 reviews)0 comments
Updated
