blaise314 4 #1 Posted April 29, 2009 Thanks again everybody for all the recent help. This forum is a great resource. I was looking into replacing the drive belt on my C-101 (91-10K802) and this simple task quickly became frustrating. According to the Toro Master Parts Viewer, I need a 7478 or 106496, which is either a 5/8" x 84" or 5/8" x 85" belt. Fine, I can forgive an inch. But according to the Toro Wheel Horse Lube & Belt Recommendations 1956-1999, I need a 7473, which is 21/32" x 82". That's a three inch difference! I have no problem with a good quality aftermarket belt, but I'd like to know the original part number to cross. Any help here would be greatly appreciated. Share this post Link to post Share on other sites
mcwh1950 2 #2 Posted April 29, 2009 hope this help Diagram: 91-10K802, C-101 8-Speed Tractor, 1979 DRIVE BELT AND PULLEYS TLB Toro Consumer 7473 Drive Belt C-81, C-101, C-111, C-121, C-141, C-161 Only Share this post Link to post Share on other sites
C-Series14 15 #3 Posted April 30, 2009 7478 is for the Auto's. 7473 is the correct number, don't ask me why I know...I got a few!!!! Share this post Link to post Share on other sites
blaise314 4 #4 Posted April 30, 2009 How about we call this my daily mulligan. Had I taken the time to scroll down on the Toro Master Parts Viewer, I would have seen that both belts are listed. Thanks for the help Smitty. Share this post Link to post Share on other sites