stubs 5 #1 Posted June 19, 2018 I just finished rebuilding my twin 17 kohler and went to take my drive pulley off my junk engine and it broke. My question is are all drive pulleys the same? Im going to the big horse show this week and just want to be sure i get the right pulley. Share this post Link to post Share on other sites
dells68 7,494 #2 Posted June 19, 2018 Can't say for sure on them all being the same. The one on my gt14 and C125's are the same. All three fit a 1 1/8" shaft. I have one that I loaded in my for sale totes. Come by and see me in the swap area. Look for the goofy, fat guy with a long white goatee. You'll know me when you see me - I don't have a lick of sense! 1 Share this post Link to post Share on other sites
stubs 5 #3 Posted June 19, 2018 ill keep an eye out for you Share this post Link to post Share on other sites
SPINJIM 1,978 #4 Posted June 20, 2018 I'll also have one for sale. I'll be in one of the pavilions near the track (if I get there early enough). If dells68 doesn't have the right one, look me up. Jim Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,499 #5 Posted June 20, 2018 Manual transmission and hydro models use different diameter engine pulleys. Garry Share this post Link to post Share on other sites