Miker-1 1 #1 Posted December 1, 2017 Looking for Eldon for help on installing bearing race kit on front spindles. where do you install bearing? Thanks miker-1 Share this post Link to post Share on other sites
WHX?? 46,774 #2 Posted December 1, 2017 Sorry Miker ....Eldon is currently busy doing a valve job on a K301 but I am sure others who have done these bearing kits will be long to help. Share this post Link to post Share on other sites
953 nut 51,681 #3 Posted December 1, 2017 2 hours ago, Miker-1 said: bearing race kit on front spindles. Pictures of exactly what you are working on would help. Share this post Link to post Share on other sites
Miker-1 1 #4 Posted December 2, 2017 I have a 1989 520-h wanting to install front axel spindle kit, but I think I got wrong kit, diameter is larger than my spindles Share this post Link to post Share on other sites
Skipper 1,788 #5 Posted December 2, 2017 If its the right kit, the inner race will fit directly on your 520 spindle axle. On a 520 they should be 1". 1 Share this post Link to post Share on other sites
littleredrider 408 #6 Posted December 2, 2017 Believe you got the wrong kit. I did the spindle thing years ago and was a bolt on deal. Share this post Link to post Share on other sites
ericj 1,576 #7 Posted December 3, 2017 the 89 520 only ran a 3/4" spindle, the 90 and newer had the 1" spindle eric j 1 Share this post Link to post Share on other sites
Miker-1 1 #8 Posted December 3, 2017 Correct I have 3/4 spindles and a 1 inch kit. do you know if there is a 3/4 kit made. Thanks Share this post Link to post Share on other sites