Kavint76 56 #1 Posted January 1, 2017 (edited) Well I finally figured out why my 1277 didn't move someone had the needle valve to push the mower out about a quarter inch after I turned it in the hole way it works fine now . something so simple I don't know much bout the tractor but very happy to have it going. Now I need some pulleys for my 42in deck they r almost rotted away any ideas on where to find them thnx. Edited January 1, 2017 by Kavint76 1 Share this post Link to post Share on other sites
953 nut 51,721 #2 Posted January 1, 2017 I figured it was the tow valve; glad to hear it is fixed. One of our vendors is likely to have the parts you need for the deck. Remove the pulley and shoot a picture of it, there were several types used over the years depending on the age of the deck. Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #3 Posted January 1, 2017 There is a set on that big auction site now. Share this post Link to post Share on other sites