BairleaFarm 339 #1 Posted November 2, 2008 Cleaned up the B100 a little today. I installed a new hour meter. Kinda cheap so we will see how long it lasts. I likes how it had the clips on the back so I didnt have to drill any holes. Anyone else have a crooked hood like I have pictured here? At what point do you decide a tractor needs repainted? Share this post Link to post Share on other sites
Sparky-(Admin) 19,549 #2 Posted November 2, 2008 I think the paint looks fine as it is. Did you Armour-All the tires? Mike........ Share this post Link to post Share on other sites
BairleaFarm 339 #3 Posted November 2, 2008 Dont worry Im not messing with this paint. Ir wasnt armorol but a detail product we use at work. Cheapo stuff got interiors and exteriors. I actully did the whole tractor. Share this post Link to post Share on other sites
saguaro 0 #4 Posted November 2, 2008 When it looked like mine. Then it's time Share this post Link to post Share on other sites
KyBlue 652 #5 Posted November 2, 2008 I think it looks good as is too - David, sorry I didnt get that Disc over to ya. My Family stayed late yesterday, and today Ive been quite busy trying to fit a weekends work into one day.. Gotta go back to drivin tonite, instead of monday night..dangit.. lol Hows the B Do for ya?? better? Oh, it looks like the dash tower thingy is twisted.. Share this post Link to post Share on other sites
BairleaFarm 339 #6 Posted November 3, 2008 No worry scott. If i need it ill swing by and pic it up, The tower seems fne. It also me looks like the hood has been hit and maybe shifted a little. Hard to say Share this post Link to post Share on other sites
KyBlue 652 #7 Posted November 3, 2008 David, it might be the photo but Looking down the tower.. you can see a twist to it, with the right side being farther back than the left, which fits with how the hood is matching up to it as well. Share this post Link to post Share on other sites
Rollerman 290 #8 Posted November 3, 2008 Scott & David...thats what years & years of craking up that lift handle will do. The tower tends to twist. Share this post Link to post Share on other sites
BairleaFarm 339 #9 Posted November 3, 2008 Now that I think about it I think the c160 was like that. Thanks Share this post Link to post Share on other sites
HorseFixer 2,012 #10 Posted November 3, 2008 Looks good david! great job! Share this post Link to post Share on other sites
84 400 0 #11 Posted November 3, 2008 Looks good. sometimes I wish I never started repainting my 552 Share this post Link to post Share on other sites
mcwh1950 2 #12 Posted November 3, 2008 david nice b-100. by looking at you first picture ,on you blade handle the silver release lever should be facing to the front not the rear.. Share this post Link to post Share on other sites
BairleaFarm 339 #13 Posted November 3, 2008 It wont work the other way. With it turned like this it keeps the handle close to the tractor. Share this post Link to post Share on other sites
mcwh1950 2 #14 Posted November 3, 2008 It wont work the other way. With it turned like this it keeps the handle close to the tractor. david not the red handle.. only the silver lever shoud be turn around so the lever is in the front. Share this post Link to post Share on other sites
BairleaFarm 339 #15 Posted November 3, 2008 Just the silver part.... i see. I wonder why it was off? Ill switch that around Share this post Link to post Share on other sites
tasmi01 3 #16 Posted November 7, 2008 David nice B-100 the paint looks pretty good as well :hide: Share this post Link to post Share on other sites