stevasaurus 22,230 #26 Posted October 2, 2014 Tom, do you have the old fuel pump?? Share this post Link to post Share on other sites
tom h.hill 10 #27 Posted October 2, 2014 Ya. I've tried mixing and matching. But I'll take another look. Wish I had the origanal. It had a primer lever on it. 1 Share this post Link to post Share on other sites
stevasaurus 22,230 #28 Posted October 2, 2014 It's just that if you had the old metal one, the manual says they are serviceable. Maybe go to a good lawn mower shop and you can get parts or they can rebuild it. Share this post Link to post Share on other sites
tom h.hill 10 #29 Posted October 2, 2014 im back again i got that B.S. fuel pump made up the plate same as what the gasket looks like.drilled an tapped the hole in center of plate.put in the pipe fitting with a nipple on the end .hooked it all up primed it an she started right up.go back out again in a few to see if it starts up again.an then put the whole thing back together.keep your fingers crossed. 1 Share this post Link to post Share on other sites
tom h.hill 10 #30 Posted October 3, 2014 Went back out tried it again an seems now it's working the way it should be. Back at it when I get home from work. See how it goes. 1 Share this post Link to post Share on other sites
tom h.hill 10 #31 Posted October 5, 2014 good news it all works perfect.thanks 1 Share this post Link to post Share on other sites
