WH nut 553 #1 Posted May 21, 2014 So I decided to take the snow blower off the 145 today and put a mower deck on. Went out to the shed and grabbed a deck. Surprise, it was a 48in I didn't know I had. I thought I only had the one the 520 Share this post Link to post Share on other sites
Sparky-(Admin) 19,553 #2 Posted May 22, 2014 Man you gotta have a huge pile of decks not to know what ya got ! I can say for sure that I have one 36RD and two 42SD's.....and that's it! Mike.......... Share this post Link to post Share on other sites
stevebo-(Moderator) 8,040 #3 Posted May 22, 2014 I have been there too.... Share this post Link to post Share on other sites
AMC RULES 36,945 #4 Posted May 22, 2014 I find it hard to believe... you could just forget you had a big deck. Share this post Link to post Share on other sites
papaglide 541 #5 Posted May 22, 2014 Ok.............how many beers were involved? 1 Share this post Link to post Share on other sites
Tankman 3,515 #6 Posted May 22, 2014 Sounds a little sudsy. 1 Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,487 #7 Posted May 22, 2014 Like in his cups. Lol. J/K Glenn Share this post Link to post Share on other sites
WH nut 553 #8 Posted May 22, 2014 LOL no beers, I thought they were all 42 or 36s. I only have about 6 or 7 in the shed Share this post Link to post Share on other sites
Ken B 3,116 #9 Posted May 22, 2014 I have been there too.... Steve, you are there... Share this post Link to post Share on other sites
Kelly 1,028 #10 Posted May 22, 2014 42" and 48" are easy to tell apart the height adjustment lever is on the left on a 48" and the right on a 42" also the belt guard bolts/screws on the the shell vertically on a 42" and on the 48" it bolts horizontally to the heavy reinforcement brace. Share this post Link to post Share on other sites
WH nut 553 #11 Posted May 22, 2014 (edited) 42" and 48" are easy to tell apart the height adjustment lever is on the left on a 48" and the right on a 42" also the belt guard bolts/screws on the the shell vertically on a 42" and on the 48" it bolts horizontally to the heavy reinforcement brace. That I know, I just didn't realize I had another 48in Edited May 22, 2014 by WH nut Share this post Link to post Share on other sites
Wheel-N-It 2,967 #12 Posted May 22, 2014 Same thing happened to me last week. I've been putting all my Wheel Horse stuff in one building, and found an extra 48" SD. Sometimes life IS good 1 Share this post Link to post Share on other sites
