SCOOBY 312-h 14 #1 Posted January 5, 2014 ok so here is the start and some teaser photos it is a later c-165. its either going to have 2 twelves or 2 tens in it. we will see what works. Share this post Link to post Share on other sites
AMC RULES 36,945 #2 Posted January 5, 2014 Humm...one of each would be different. Share this post Link to post Share on other sites
SCOOBY 312-h 14 #3 Posted January 5, 2014 i forgot to add. The parts tractors i got for this project were a 310-8, a 312-8, and what im pretty sure is a c-145 automatic. i have to strip the engines, and one of the front axles for the 165 because the one on it is completely shot. i have another 12 sitting in my garage so im thinking 2 twelves, or if i can find a magnum 10 i will throw that at it. This tractor will only be functional for pulling anything via the hitch, tractor pulls, and im going to make it tow other tractors using a wheel lift tow bar. I am going to have to take out the lift mechanism to facilitate both engines, and possibly move the dash back a couple inches. follow this post for more updates soon. craig i was acually thinking about that, put the twelve in the back and the ten in the front to "help it" along. it would be a 22 horsepower beast 1 Share this post Link to post Share on other sites
Wishin4a416 2,189 #4 Posted January 5, 2014 Sounds like an interesting project. I will definately keep a watch on this one. Good Luck!! Share this post Link to post Share on other sites
KC9KAS 4,741 #5 Posted January 5, 2014 Would one of the engines be a "pony" engine....get it, Pony...Horse....Wheel Horse....Oh well, Can't wait for the build thread! 1 Share this post Link to post Share on other sites
AMC RULES 36,945 #6 Posted January 5, 2014 I'd think... both of 'em would be pony motors. 1 Share this post Link to post Share on other sites
SCOOBY 312-h 14 #7 Posted January 5, 2014 Well after 4 hours of busting knuckles, a big hammer, and some patience i achieved getting 2 engines, a front axle, a steering bracket, an extra pto, and some tie rods. The next journey is to set the engines down into the frame to see what i have to move or modify. And now i am left with a truck bed full of wheelhorse frames, and random parts. Share this post Link to post Share on other sites
Eric857 54 #8 Posted January 6, 2014 ^ let us take a moment of silence for the fallen ones 4 Share this post Link to post Share on other sites
SCOOBY 312-h 14 #9 Posted January 6, 2014 Lol Eric yes lets honor the leftovers. acually the one wasnt a 145 auto it was a 175 auto. im going to try not to scrap this stuff, it will eventually find a new home. 1 Share this post Link to post Share on other sites
AMC RULES 36,945 #10 Posted January 6, 2014 HEY! Don't scrap that stuff... there's still a lot of good parts there. 1 Share this post Link to post Share on other sites
chevyaddict83 39 #11 Posted January 6, 2014 Scooby, where you located. I like leftovers Sent from my SPH-L710 using Tapatalk Share this post Link to post Share on other sites
SCOOBY 312-h 14 #12 Posted January 7, 2014 dont worry i promise i wont srap anything. it will find new homes soon. maby ill post up some better pics in classifieds for the parts tractors Share this post Link to post Share on other sites
Desko 552 #13 Posted May 13, 2014 Well how bout an update? Thanks for sharing Share this post Link to post Share on other sites
