soloshep 0 #1 Posted April 29, 2012 hi my names dave new to this site and needs some help please have a tiller and need a belt plus info pics on how it fits (runs around the pulleys ) any help appreciated with this regards dave should add the id number is0736tl04 71436 serial number0135 Share this post Link to post Share on other sites
can whlvr 991 #2 Posted April 29, 2012 your tiller is a 1990,belt number is 110265,as far as aftermarket its been a long on going discusion on what size it is,some say 141,some say something else,thats a toro number,sorry dont have a pic right now of the routing,buy it goes on the pulley from the motor,you need to take the hoop off to slide the belt behind it,then it goes down through the idler assembly,the idlers have a spring that hooks to the frame,then the belt goes bach under the small idler then around the large tiller pulley,im sorry if this doesnt help but if you have the belt with these tips it will only work one way and hopefully you can figure it out,someone else will probally have pics,and :WRS: Share this post Link to post Share on other sites
soloshep 0 #3 Posted April 29, 2012 your tiller is a 1990,belt number is 110265,as far as aftermarket its been a long on going discusion on what size it is,some say 141,some say something else,thats a toro number,sorry dont have a pic right now of the routing,buy it goes on the pulley from the motor,you need to take the hoop off to slide the belt behind it,then it goes down through the idler assembly,the idlers have a spring that hooks to the frame,then the belt goes bach under the small idler then around the large tiller pulley,im sorry if this doesnt help but if you have the belt with these tips it will only work one way and hopefully you can figure it out,someone else will probally have pics,and hi thanks for the info will try and track down a belt very desperate to use the machine regards dave Share this post Link to post Share on other sites