billworthington 2 #1 Posted April 17, 2012 Hi guys, I have a 1989, 312-8 that I am working on. The indicator lites don.t workand I read the Feb 14 link about the bd. The edge connector piece is badly corroded, wondering if I could buy that part from (Save Old Iron). Also wondering if any one knows of a generic test light switch for the same application.Mine has 6 terminals on the back of the switch, 3 of them broke off. My toro dealer said it was available but cost apx $55. Thats crazy. Thanks for your help, Bill W Share this post Link to post Share on other sites
Save Old Iron 1,563 #2 Posted April 17, 2012 Bill, send me a PM with your address and I will ship out a connector for you. On my list of 500 things to do this summer, refit my indicator board connector comes in about 499. So if you want to do some investigation on fabricating a method to install the connector and do a small write up for the group, I'll send out the connector (and possibly a suitable 6 pin switch) for free. Chuck Share this post Link to post Share on other sites