hoppy 0 #1 Posted January 6, 2011 are these carbs any good for H60's? thinking about trying one depending on the responses. anyone running one? opinions? Share this post Link to post Share on other sites
Kelly 1,028 #2 Posted January 6, 2011 I'm pretty sure that is the brand I bought and I'm using on two of my H60's and both work good, the price was about $65 each, so that was nice too. Share this post Link to post Share on other sites
hoppy 0 #3 Posted January 6, 2011 ok cool, thanks for the reply kelly! Share this post Link to post Share on other sites
ducky 1 #4 Posted January 6, 2011 where do u find the oregon carbs? i need a new carb for my hh100 any thoughts? Share this post Link to post Share on other sites
wallfish 15,921 #6 Posted January 6, 2011 where do u find the oregon carbs? i need a new carb for my hh100 any thoughts? Pats small engine has them, click this LINK The H60 Oregon carb is $36 You can get the H60 teccy carb for $68 I didn't see an Oregon Carb on there for the HH100 but if you scroll down and click on "For More Tecumseh Carbs" you will find the Teccy HH100 carb for $83. The Walbro version is NLA I have been ordering the full rebuild kit (with all the needles) and give the carb a VERY good and THOROUGH cleaning. Seems to work for me. I have one that the throttle shaft was worn too bad and no matter what I did, it would run like crap. That was until I spayed a little PB Blaster on it and put some gasket sealer on there for a temporary solution until I could buy a new carb. 1 1/2 years and the temp seal is still holding. Keep in mind that this is a crap 9 hp snowblower motor that I use on the tractor instead of the original H60 so I don't really care about it as long as it runs. Share this post Link to post Share on other sites